论文部分内容阅读
日本钢管公司福山烧结厂为了降低能耗,近期采用了一系列措施,其中主要有: 1 减少烧结机的漏风为了减少占烧结机总漏风量一半左右的台车边板附近的漏风量,该厂分别于1987年2月和4月对其5号((?)0m~2)和4号(400m~2)烧结机的台车进行了改造。把边板做成整块,并在台车端部采用宽篦条。这样,废气量约减少11％,电耗下降0.8kwh/t。
In order to reduce energy consumption, Japanese steel pipe company Fukuyama Sintering Plant recently adopted a series of measures, including: 1. Reduce the air leakage of the sintering machine In order to reduce the amount of air leakage near the edge of the trolley that accounts for about half of the total air leakage of the sintering machine, In February and April 1987 respectively, the No. 5 ((?) 0m ~ 2) and the No. 4 (400m ~ 2) sintering machine trolley was modified. Make the side panels as a single piece and use wide grates at the end of the trolley. In this way, about 11% reduction in emissions, power consumption decreased 0.8kwh / t.