乳状液膜法分离高钼低钨料液中钨钼的研究

来源 :膜科学与技术 | 被引量 : 0次 | 上传用户:w253602739
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
根据钼资源利用中钼料液含少量钨的具体实际,对此类高钼低钨料液采用以三烷基氧化膦(TRPO)为载体、NaOH为反萃试剂的液膜体系来分离钨钼考察了影响钨钼分离的诸因素,得到了分离钨钼的最佳操作条件在此条件下,钼的浓度为00521mol/L,WO3与Mo的质量分数为10%的料液经一级间歇液膜过程,在内水相可得到纯度为100%的钼 According to the actual use of molybdenum resources in the molybdenum liquid containing a small amount of tungsten in practice, for such high-molybdenum low tungsten material solution using trialkyl phosphine oxide (TRPO) as a carrier, NaOH as the stripping reagent liquid membrane system to separate tungsten and molybdenum  Investigated the factors that affect the separation of tungsten and molybdenum, obtained the best operating conditions for separation of tungsten and molybdenum  In this condition, the concentration of molybdenum is 0  0521mol / L, WO3 and Mo mass fraction of 10% An intermittent liquid film process, in the inner water phase can be obtained with a purity of 100% molybdenum 
其他文献