基于KW-SIFT描述子的遥感图像配准

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:xiaobaby2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A technique to construct an affine invariant descriptor for remote-sensing image registration based on the scale invariant features transform (SIFT) in a kernel space is proposed. Affine invariant SIFT descriptor is first developed in an elliptical region determined by the Hessian matrix of the feature points. Thereafter, the descriptor is mapped to a feature space induced by a kernel, and a new descriptor is constructed by whitening the mapped descriptor in the feature space, with the transform called KW-SIFT. In a final step, the new descriptor is used to register remote-sensing images. Experimental results for remote-sensing image registration indicate that the proposed method improves the registration performance as compared with other related methods.
其他文献
期刊
通过激光焊接X100管线钢试验, 研究了热输入对焊接接头显微组织和硬度的影响, 并对典型的全熔透样品进行了力学性能分析。研究结果表明, 当热输入达到1.5 kJ·cm-1时, 可获得全熔透焊缝, 熔宽和热影响区的宽度分别达到1.8 mm和1.0 mm。一定范围内的热输入对焊接接头各个微区的显微组织影响不明显, 焊缝区、粗晶区和细晶区的硬度均高于母材的, 混晶区的硬度低于母材的。拉伸断裂的位置出现在母材。激光全熔透焊接接头的冲击功达到母材水平, 热影响区的冲击功达到母材的66%, 均为典型的韧性断裂。
期刊
开展了连续激光二极管抽运声光调Q高重复频率人眼安全内腔式KTP光参量振荡器(KTP-OPO)的实验研究,研究了在相同二极管抽运功率下,基频光和信号光输出功率和脉冲宽度随调制频率的变化关系,获得了平均功率为1.6 W,脉冲宽度为6~10 ns,M2因子为5,重复频率为5~20 kHz的人眼安全激光输出,光光转换效率为5.3%。
期刊
期刊
In free-space or in optical fibers, orbital angular momentum (OAM) multiplexing for information transmission has been greatly developed. The light sources used were well coherent communication bands, and the fibers used were customized. Here, we use an 81
光学元件在加工及使用过程中引入的麻点或擦痕会严重影响其表面质量。基于Peterson疵病散射理论,将麻点或擦痕引起的散射光分为两部分,即对麻点(或擦痕)内部表面的散射光作漫反射分析,对麻点或擦痕外围轮廓引起的散射光作衍射分析。进一步考虑麻点和擦痕的挡光效应,以及麻点衍射消失的边界条件,通过将疵病散射理论与国家标准GB/T 1185—2006相结合,推导出麻点、擦痕的双向反射分布函数的解析表达式,进
本文报导了一台电晕预电离XeCl准分子激光器的实验研究, 输出最大脉冲激光能量超过250毫焦耳。研究了各种放电参数对输出激光能量的影响。
期刊
期刊