thermomechanical相关论文
Thermodynamic Consistency and Thermomechanical Dynamics (TMD) for Nonequilibrium Irreversible Mechan
The irreversible mechanism of heat engines is studied in terms of <em>thermodynamic consistency</em> and thermomechanica......
有机朗肯循环是利用低温热源的有效措施之一,将非共沸混合工质应用于有机朗肯循环尚存在争论.从热力学角度研究了非共沸混合工质的......
Effect of intercritical annealing on microstructure,mechanical properties,and work-hardening behavio
In this study,three kinds of dual-phase (DP)steels were used to investigate the influence of silicon content and interer......
目的构建一个能够量化皮肤热痛感的整体数学模型。方法通过考虑皮肤热力耦合行为以及目前神经学对疼痛感觉的理解开发一个量化热疼......
利用力学性能、电学性能测试,金相、电镜观察及电子衍射分析研究了不同形变热处理条件下Cu-1.5Ni-0.27Si合金性能与显微组织的关系......
Effect of thermomechanical cyclic quenching and tempering treatments on microstructure,mechanical an
Thermomechanical cyclic quenching and tempering(TMCT)can strengthen steels through a grain size reduction mechanism.The ......
研究了微量元素及形变热处理工艺对铜基合金弹性模量的影响。...
采用压缩试验法研究了HAL62-3-3-0.7合金的热变形规律.在不同的变形参数条件下,根据其真实σ-ε曲线拟合了可以反映HAL62-3-3-0.7......
A new Gum-type alloy (Ti-Nb-Zr-Fe-O) in which Fe is used instead of Ta was subjected to a particular thermomechanical pr......
The effect of thermomechanical treatment on the magnetic properties of Mn85.5Fe9.0Cu0.5 alloy was studied by use of a ma......
由热刺激而引致的皮肤疼痛是在日常生活以及医学上广泛应用的热治疗手段中常见的问题.然而,有关皮肤热疼痛的物理机制并不明晰,也......
提出了斜角切削热力模型。用等效平面方法把不等分剪切区的直角切削理论延伸并应用于斜角切削中，等效平面的方位由定义的等效平面角......
在耗散结构理论和材料动态行为模拟方法（ＤＭＭ）的基础上，作者提出了一种确定锻造热力参数范围的方法，以获得组织和性能稳定一致的钛合金锻件......
The superplasticity of high strength superhard A1 alloy LC4 was improved to a great extentby modified thermomechanical t......
A rapidly solidified microcrystalline Al-Li-Cu-Mg-Zr alloy and its superplasicity have beeninvestigated.An optimum tensi......
Based on loading-ualoading test, tensile impact recovery experimen-tal techniques have been developed to obtain the isot......
Development of Tailored Structure and Tensile Properties of Thermomechanical Treated Micro Alloyed L
Direct hot rolled dual phase steel production represents a challenging route, compared with cold rolled and intercritica......
Ultrafine grained steels with grain sizes below about 1 μm offer the prospect of high strength and high toughness with ......
The aim of this work is the demonstration of the effect of thermomechanical treatments on the properties of the alloy Al......
Thermo-Mechanical Treatment on Microstructure and Mechanical Properties of Mg-5.0Sn-1.0Mn-0.4Zr Allo
The mechanical properties and microstructure of an as-cast Mg-5.0Sn-1.0Mn-0.4Zr alloy were investigated during thermo me......
Geometrically Nonlinear Bending Analysis of Metal-Ceramic Composite Beams under Thermomechanical Loa
A new method is developed to derive equilibrium equations of Metal-Ceramic beams based on first order shear deformation ......
The method controlling grain shape in TMT processing and the effect of grain shape on char-acteristic parameters in supe......
A theoretical approach is presented for analyzing the ply cracking in general symmetric lami-nates subjected to any comb......
Three-Dimensional Thermo-mechanical Coupled FEM Simulation for Hot Continuous Rolling of Large-Diame
Based on the important boundary conditions of rolling simulation including friction, heat conduction and interactionsof ......
A generalized mathematical model is developed to predict the changes of temperature, rolling pressure, strain,strain rat......
Prediction of Properties in Thermomechanically Treated Cu-Cr-Zr Alloy by an Artificial Neural Networ
A supervised artificial neural network (ANN) to model the nonlinear relationship between parameters of thermomechanical ......
The isothermal low cycle fatigue (LCF)and thermomechanical fatigue (TMF) behaviourof a Ni-base superalloy was investigat......
An investigation was carried out of the morphology and microstructure of V-Ti complexcarbonitride in steel 09MnVTiN duri......
Thermomechanical coupling of PVC sheet with defects under uniaxial loading at different rates and different sizes of mic......
Relationship between the microstructure and properties of thermomechanically processed Fe-17Mn and F
Two austenitic Mn steels(Fe-17Mn and Fe-17Mn-3Al(wt%,so as the follows))were subjected to thermomechanical processing(TM......
This article reviews the status of thermomechanical analysis of the friction stir welding(FSW)process for establishing g......
The effect of rolling temperature on both two-and single-phase regions and annealing in a temperature range of 700–950&......
A water drinking bird or simply drinking bird (DB) is discussed in terms of a thermomechanical model. A mathematical exp......
We discuss a thermoelectric energy generation (TEG) technique by employing a thermomechanical model of a drinking bird (......
