【摘 要】
：
The stress corrosion cracking(SCC)behavior f A508/52M part in dissimilar metal weld A508/52M/316L in simulated primary water environments at 290℃ was investigated by means of slow strain rate testing(
【机 构】
：
Shanghai Research Institute of Materials(SRIM),Shanghai Key Lab for Engineering Materials Applicatio
【出 处】
：
第三届核电厂材料与安全可靠性国际研讨会 (3rd MRNPP Symposium)
论文部分内容阅读
The stress corrosion cracking(SCC)behavior f A508/52M part in dissimilar metal weld A508/52M/316L in simulated primary water environments at 290℃ was investigated by means of slow strain rate testing(SSRT)and electrode potential monitor/control.The work was focused on the effects of water chemistry factors and mechanical factors.The water chemistry factors were impurities contaminations,i.e.chloride and sulfate,and electrode potential which varied in the range from-720 to +400mV(SHE)that simulated the electrochemical conditions of the weld in the environments from ideal water chemistry to bad water chemistry with significant contamination of oxygen.The mechanical factors were strain rate and existence of notch as stress raiser.Results from the tests on smooth specimens in the water without impurities doping showed that,when tested within the potential range from-720 to +200mV(SHE),the specimens always failed in the bulk zone of 52M weld metal in mechanical ductile style,similar to the behavior when tested in nitrogen gas.When the potential was raised to +300 and +400mV(SHE),the weld failed in brittle style by significant SCC,with transgranular SCC happened both along the interface and in A508 heat affected zone(HAZ)and intergranular SCC in the Nickel-based weld metal close to the interface.The doping of 10ppm chloride or sulfate in the water raised the susceptibilities to SCC and pitting.The decrease of strain rate from 1x10-6 s-1 to 3.1 x10-7 s-1 raised the SCC susceptibility slightly.The existence of notch at the interface raised the SCC susceptibility significantly.The cracking mechanism and meaning in application of experimental results are discussed.
其他文献
Supplementation of lost signal for occluded target has been proposed in a context of multipedestrian tracking using a composite sensor consisting of omnidirectional camera and laser range finder by an
This paper proposes exercise support system.General exercise tools such as pedometer need to be carried while exercising.However,people sometimes forget to take such exercise sensor,and feel hard to c
In order to recognize human actions from video sequences,local self-similarity of intensity and optical flow(LSS-IOF)is presented to describe actions.Our descriptor is based on the recently proposed l
Grain boundary engineering(GBE)was applied to enhancing the stress corrosion cracking(SCC)resistance of 304 stainless steel.After the GBE treatment,the grain boundary network(GBN)was featured by the h
The raw materials is the pivotal role for the U-bending heat-transfer pipe of nuclear power steam generator.800-alloy is nickel base alloy with high strength and high corrosion resistance.It greatly i
Nickel-based alloys such as Alloy 600 and Alloy 690,and weld metals such as Alloys 182/2082/132/52/152 have been widely used in pressurized water reactor(PWR)components.Stress corrosion cracking(SCC)o
Nuclear-grade stainless steels and nickel-base alloys have been extensively used as construction materials in nuclear power industry due to their combined good mechanical properties and corrosion resi
This paper studies the effects of Zn additions on the deposition behavior of Co in oxide films in the simulated PWR primary water environment at 315℃.304 stainless steel was soaked in high temperature
The commercial Alloy 690TT was first immersed in the normal hydrogenated primary water at 325 ℃ and 15.6 MPa for 720h and then immersed in the oxygenated primary water at 325℃ and 15.6 MPa for 720h wi
Steam generation tubing materials have the susceptibility of stress corrosion cracking(SCC)under the severe steam conditions.Alloy 600,Alloy 800 and Alloy 690 are widely used as the steam generation t