Fatigue and Healing Characteristic of Asphalt

来源 :第三届中国沥青材料国际学术会议 | 被引量 : 0次 | 上传用户:xuliyong
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The fatigue characteristics of asphalt have been studied for many years.But there is not a unique evaluation index for asphalt fatigue.After the healing phenomenon was noticed,it indicates that it is essential to study the fatigue characteristic of asphalt considering rest periods.In this research,the fatigue characteristics of asphalt under continuous load and the healing ability of asphalt have been studied.And the advantages and disadvantages of different fatigue indexes were analyzed.The results show that the fatigue performance of asphalt descends with the loading increasing.When the loading is bigger,the modulus decreases with the times of loading increasing,and when the loading is smaller,there is hardening phenomenon.The indexes (50%G * 、DER、DR、δ) has some relationship between each other,but all of them have some deficiency in evaluating the fatigue characteristic of asphalt.The problem is the definition of the failure point is not suitable.The healing characteristic has an important performance on the fatigue characteristic of asphalt.The healing rate at the initial period after stopping loading is bigger than later.With time increasing,the characteristic of asphalt after rest is getting closer to the characteristic before rest.
其他文献
2010年上半年,在国家局公布的11项行业卷烟对标指标(4项效率效益类指标,7项费用类指标)中,与上年同期值、行业平均值(全国烟草商业企业平均值,以下均简称“行业平均值”)水平
The fatigue characteristics of asphalt mixes are usually expressed as relationships among the initial tensile stress or strain,the initial stiffness and the num
会议
同步动态随机存储器(SDRAM)因其高密度,低功耗,且价格低廉,而大量应用于计算机的主存储器,对于SOC(System On a Chip,系统芯片)来说,片上存储器是一种不可或缺的IP核,它的好
会议
本文设计了一种基于多项式基的有限域乘法器,此乘法器可适用于任何本原多项式的有限域乘法.本设计在0.13μm的工艺下全定制实现,设计结果表明,本设计实现面积有较大减小.
本文以一个32位动态稀疏树加法器为对象,研究了自动噪声分析流程与方法,提出了曲线拟合与顺序搜索两种噪声识别算法,实现了NoiseSpy噪声自动分析软件.在分析结果的基础上,我
会议
Traffic loading is usually characterized by means of the number of Equivalent Single Axle Loads (ESALs) or by means of the axle load distributions (load spectra
会议
本文研究了高速CAM的电路设计和优化技术.对CAM的匹配速度进行研究分析,在基于传输管的全局匹配线加速结构的基础上,提出了一种改进的分级匹配线加速技术,用预充信号的反相控
会议
本文设计实现了微处理器目标cache中一种27位比较电路,从设计原理到电路结构都作了较为详细的分析.其中在输入结构中引入了传输管逻辑,使得电路的结构比传统电路大为简化;在
会议
为了缓解DSP到仿真器,仿真器到调试主机各部分互连带宽和存储成本的矛盾,使用Verilog实现一种基于FPGA的SDRAM控制器来外接低成本大容量的SDRAM,用于缓存DSP处传来的高速trac
本文设计并实现了一个16×32位乘法器,该乘法器基于2个16位SIMD乘法器,采用2级流水线结构,实现后的乘法器可以执行三种模式的乘法运算:4个8×8位、2个16×16位、1个16×32位