【摘 要】
：
Buck Power Factor Correction (PFC) converter has attracted a lot of research interests for its high efficiency at low input condition.The low output voltage also facilitates the design of the cascade
【机 构】
：
College of Electrical Engineering Zhejiang University,Hangzhou,China
论文部分内容阅读
Buck Power Factor Correction (PFC) converter has attracted a lot of research interests for its high efficiency at low input condition.The low output voltage also facilitates the design of the cascade power stage.However,the conventional CRM buck PFC converter usually suffers low power factor (PF) or poor harmonic performance.And the output voltage is the only parameter to adjust the PF and harmonic performance,which is not flexible for circuit design and optimization.This paper proposes a peak current mode control scheme with optimized current reference for CRM Buck PFC converter.The proposed control scheme can provide an extra control parameter to adjust the PF and harmonics besides the output voltage.And a higher PF and efficiency can be achieved compared with conventional CRM Buck PFC.Furthermore,the inductor size can also be reduced due to lower peak current.Experimental results from a 100W CRM Buck PFC prototype verify the effectiveness of the proposed control scheme.The full load efficiency is higher than 95.4% across the entire input ranges.And the PF is above 0.95 at 115Vac input with 84Vdc output.
其他文献
Voltage-temperature coefficient (S) is the key parameter for measuring the light-emitting diode (LED)’s junction temperature.Common method for determining junction temperature by the S is under low cu
One of the most critical reliability problems that the LED COBs are facing is the failure of wire bonding connections.The LED COBs would easily break down due to the mechanical shocks or material stre
Single LED package based on encapsulated leadframe provides a common electrical and thermal path with dramatic reduction of its thermal resistance.The specific LED packaging technology consists of a s
LED display is applied in advertising,transportation,information release,etc.Traditional LED display module includes LED board,driving PCB,plastic mask and back shell.The dot pitch of traditional LED
High efficiency white light-emitting diodes (LEDS) with superior spatial color homogeneity (SCH) have been investigated.In this paper,a new method of packaging of white pc-LEDs that employs a selfexpo
This paper investigated thermal behavior of three kinds of FC packages connected with AuSn,SAC305,and electrical conductive adhesive using 1-D thermal resistance circuit method,and finite element meth
0-10V dimming is popular in commercial buildings for energy management control.This paper introduces the 0-10V dimming system,circuit and operating principle.An integrated controller is presented whic
A novel bias supply scheme for IC controller is proposed in this paper.With this scheme,no auxiliary winding or linear voltage regulator is needed,and bias supply efficiency is improved.A Buck convert
Total internal reflection (TIR) effect leads to low light extraction efficiency (LEE) of the GaN LEDs on SiC and sapphire substrates.The LEE enhancements of the GaN based flip-chip light-emitting diod
With the evolution of LED manufacture industry,LED efficacy increases around 10% annually in the past years and now it has already been ready to replace most of the conventional light sources includin