Investigation on Micro Morphology of Low Waste/Cement Paste by Soft X-Ray Microscopy

来源 :The 8th International Symposium on Cement & Concrete(ISCC 20 | 被引量 : 0次 | 上传用户:leunggz
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Soft X-ray microscopy using advances in nanotechnology to provide state-of-the-art Fresnel zone plate optics has now achieved a 15 nm spatial resolution,which makes it a powerful tool to study the microstructure of cement hydration in situ soft X-ray images possible by using the wet window.
其他文献
The authors used the laser granularity survey technology,X-ray powder diffraction,scanning electron microscopy(SEM)and infrared spectrum analysis methods,mechanochemical effect and hydration activity
Steel slag is an industrial waste formed in the process of steelmaking,15%-20%of steel production.It can take the place of iron correction material in cement sintering because of its high iron content
Using the calorimetry,X-ray diffraction(XRD)and scanning electron microscopy(SEM)on the mixed double mixing material of cement hydration heat release characteristics of hydration products and microstr
The effect of substituting fly ash for silica fume used as raw material in the hydrothermal synthesis of hardened calcium silicate hydrate material with low water to power ratio was investigated.Fly a
Sulfate of Portland cement paste dissolves into aqueous phase to participate in cement hydration and a small part would be adsorbed on C-S-H gel usually for high curing temperatures at early hydration
In this study,an experiment was taken to simulate the self-compacting concrete(SCC)formwork pressure over time by varying the casting rate and formwork width.In order to apply SCC to Double-Wall Preca
Geopolymer with different CaO content was produced,of which metakaolin,slag and fly ash were used as raw material,low modulus water glass(sodium silicate)was used as alkali-activator and the influence
This paper presents the experimental tests on working performance of self-consolidating concrete(SCC)influenced by raw material in Jiangsu province to study SCC and its use in double-wall precast conc
The mechanical properties of fine rubber particles modified engineered cementitious composite(ECC)are investigated in this paper.The fine rubber particles are introduced into ECC as an additive at thr
In cold area,the freeze-thaw cycling durabiliy of building materials is the one of the primary influence factor.This paper studied on the loss ratio of the relative dynamic elastic modulus of the auto