【摘 要】
:
Al-7 wt% Si ahoy was treated by the high pressure solution (2 GPa) and natural aging, and precipitation behavior of the dispersoids in the alloy was investigated through TEM to provide a possible form
【机 构】
:
Beihang University, China Yanshan University, Chi
【出 处】
:
15th International Conference on Aluminium Alloys(ICAA15)(第十
论文部分内容阅读
Al-7 wt% Si ahoy was treated by the high pressure solution (2 GPa) and natural aging, and precipitation behavior of the dispersoids in the alloy was investigated through TEM to provide a possible formation mechanism of Si in Al-Si alloys.It is found that the nano-scale dispersoids mainly exhibit both plate-like and near-spherical morphologies and present a variety of interior structure.Based on the detailed observations on the interior structure of the dispersoids with different scale, the precipitation behavior of those dispersoids could be described.Some Si atoms firstly precipitate from Al matrix and form the multilayered coherent structure parallel to {001}Al, and subsequently develop to semi-coherent precipitates.Finally, those precipitates further transform to Si precipitates with diamond structure and incoherent with Al matrix.
其他文献
Using Gleeeble-1500, a systematic experimental study for the effect of the temperature and heating rate on the mechanical properties of A5052 aluminium ahoy was investigated.In this experiment, specim
Al-Cu-Mg alloy (Duralumin) has a high strength and used in aerospace industry from the early 19th century.Traditionally, it has been strengthened by dispersed fine precipitates.3 decades ago, severe p
A novel thermomechanical treatment was proposed for increasing the strength of 6156 aluminum alloy while maintaining a high elongation, which is based on artificial aging at low temperature, cold roll
Al-Mg-Si alloy has been strengthened by aging treatment and used as structural materials.Transition metals (TM) are conventionally added to Al alloys for grain refinement.In this research, several TMs
This paper studied morphology and structure of iron-rich phase in the aluminium alloy using electrolytic separation technology, which content of iron was 0.3%, 0.6%, 1%, 0.6%, 2% and 5%.Results showed
Cu and Ag addition to Al alloys can enhance its mechanical properties due to solid solution hardening and precipitation hardening by aging treatment.Alloying elements affect a precipitation sequence a
Wire-Arc Additive Manufacturing (WAAM) is highly efficient, can achieve high deposition rates and does not rely on expensive equipment.WAAM thus has the potential to produce large scale, near net-shap
In this study we focused on the influence of nano-size B4C particles (~60 nm) on microstructure and mechanical behavior of Al-2024/B4C composites.The experiment involved ball milling of 2024-Al and B4
Al-Zn-Mg alloys are widely used in aircraft and automotive industries for structure components because of exceptionally high specific strength in the fully aged condition.Precipitation sequence for Al
Dispersoids play a significant role in the recrystallization and texture development for wrought Al-Mg-Si (6xxx series) alloys by inhibiting grain boundary motion.It is therefore important to understa