论文部分内容阅读
Study on the erosion resistance of epoxy composite filled with the grading silicon carbide
【机 构】
：
State Key Laboratory for Mechanical Behavior of Materials, School of Material Science and Engineerin
【出 处】
：
第八届海峡两岸工程材料研讨会
【发表日期】
：
2013年8期
其他文献
A study of rare earth effects on inclusion modality of 8Cr4MoV cold work roll steels was carried out in the laboratory, the steels smelting by a 50kg vacuum induction furnace, atmospheric casting, pro
对国产X80管线钢焊接接头的不同部位进行了常温下的硬度分布试验、单轴拉伸试验并进行了金相组织观察.结果表明:X80钢在焊接过程中同时出现了焊接硬化和焊接软化现象;焊接硬化是由于硬脆组织马氏体奥氏体组元(M-A)的产生和高温下的碳扩散导致的;X80管线钢在较高屈强比的情况下,仍然具有较高的断后伸长率;X80钢的焊接接头采用了高强匹配,焊缝金属由于魏氏组织的存在,导致塑性较差,韧性不佳.
Surface modification by diffusional carbonitriding for improving cavitation erosion resistance of Ti
In this study, a diffusional carbonitriding process was performed to modify the surface of Ti-6AI-4V alloy.Microstructure, phase constituents, hardness and cavitation erosion behavior of the treated s
综合粉末冶金和触变成形技术的优点，提出了一种集制备、成形SiCp/A1基复合材料于一体的新技术一粉末混合触变成形。研究了混粉、压实和部分重熔三工艺间的关系，特别是获得SiCp分布均匀、无气孔(空隙)的理想的触变成形用半固态锭料所需的三工艺多参数间的耦合关系和耦合依据。为该技术的应用奠定扎实的理论基础。本文以合金粉末A1Si7Mg为基体，对其半固态成形性进行了详细的评估；着重研究了基体合金粉末冷压块
Metallic glasses (MGs) are attractive for small-scale technological applications due to their attractive mechanical and magnetic properties, and the advantages in net-shape thermoplastic molding.Howev
Uniaxial tensile and uniaxial compressive tests tor Zr-basecd bulk metallic glasses (BMGs) were conducted at room and cryogenic temperatures, respectively.It was observed that both the change of macro
会议
以Ti、A1和活性炭粉为原料,利用高能球磨及热压烧结工艺,在1200℃原位合成A12O3/Ti2A1C复合材料,复合材料是在Ti2A1C层状材料的制备过程中同时被合成的.研究了在Ti-A1-C体系中,高能球磨对粉末的影响及烧结温度对反应产物的影响,并重点分析了反应机理及材料微观结构.结果表明：通过高能球磨合成了TiC和TiA1金属间复合粉体,该复合粉体经热压烧结在1200℃原位合成A12O3/Ti