【摘 要】
:
Crevice corrosion is one of the most common localized attacks,which always occurs within the occlude regions or under shielded metal surfaces.Materials relying on passive surface films for corrosion r
【机 构】
:
State Key Laboratory for Corrosion and Protection,Liaoning Key Laboratory for Safety and Assessment
【出 处】
:
第三届核电厂材料与安全可靠性国际研讨会 (3rd MRNPP Symposium)
论文部分内容阅读
Crevice corrosion is one of the most common localized attacks,which always occurs within the occlude regions or under shielded metal surfaces.Materials relying on passive surface films for corrosion resistance can be particularly vulnerable to this kind of corrosion.The issues on crevice corrosion of nuclear-grade materials have attracted more attention in recent years.In this study,crevice corrosion of nuclear-grade 304 stainless steel(304 SS)was investigated in 3.5 wt.%NaCl solution and high temperature water respectively.A multicrevice corrosion test assembly were used for the tests in 3.5 wt.%NaCl solution,based on the standard guide for crevice corrosion test,ASTM G48 at the temperature of 25,35,50 and 60℃ respectively.The results of potentiodynamic polarization curves indicate that the 304 SS were vulnerable by crevice corrosion among the temperature from 25 to 60℃.A self-made device was used for the tests in high temperature water.The present results indicated that the crevice corrosion tended to become more serious with increasing width and length of the crevice.
其他文献
Steam generation tubing materials have the susceptibility of stress corrosion cracking(SCC)under the severe steam conditions.Alloy 600,Alloy 800 and Alloy 690 are widely used as the steam generation t
The stress corrosion cracking(SCC)behavior f A508/52M part in dissimilar metal weld A508/52M/316L in simulated primary water environments at 290℃ was investigated by means of slow strain rate testing(
The effect of strain rate on stress corrosion cracking of 316LN SS in borated and lithiated(B/Li)high temperature water was studied.The results showed that SCC occurred only in a certain strain rate r
In this paper we studied the effects of temperature and dissolved oxygen on crack growth rate in 316L type stainless steel used as auxiliary pipe in nuclear power systems in high purity water under th
The crack growth rates(CGRs)of a domestic forged nuclear grade 316L SS piping material were measured at various temperatures and loading modes in simulated pressurized water reactor primary water envi
Characterizations of the microstructure and chemical composition of oxide films formed on 316NG stainless steel following exposure experiments in high temperature water with various dissolved hydrogen
Stress corrosion cracking(SCC)of sensitized 304 stainless steel(SS)in borated and lithiated high temperature water without and with Zn injection was studied using slow stain rate test(SSRT)and surface
This paper introduces a new test model and data acquisition plan for evaluation of materials of thin-walled tubes of nuclear power plant.In analogy to crack growth rate measurements using compact tens
The microstructure and distribution of residual strains were investigated in the fusion boundary region of domestic low alloy steel SA-508Ⅲ weld joint using scanning electron microscope(SEM),electron
The water environment of pressurized water reactor is high pressure and high temperature,meanwhile,in order to protect steam generators,the water chemistry in the secondary loop of PWR is required to