Assessing the Effectiveness of UV Cured VaRTM Repairs for Composite Aircraft

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户:zhang11289
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Composite structures are quickly becoming the dominant aircraft structural material for the aerospace industry and the successful repair of composite structures will be the next challenge.The purpose of this study is to develop a rapid repair technique for aircraft structures using a repair technique that is consistent and repeatable with minimum repair equipment needs and training requirements.
其他文献
This paper aims at characterizing the high-speed impact damage behavior in CFRP unidirectional (UD) and cross-ply (CP) laminates.First, high-speed (150-600m/s) impact damage was introduced by collisio
This paper focused on the initiation of a transverse crack in CFRP laminates under fatigue loadings.Transverse cracks induce more serious damage, such as delamination or fiber breakage.It is essential
The constant fatigue life (CFL) diagrams for a unidirectional CFRP laminate in the in-plane principal directions are identified.The anisomorphic CFL diagram approach, which was found to be valid for m
It is essential to improve the fracture toughness of polypropylene (PP).While the addition of an elastomer is one of the most effective methods, typical concentrations of more that 15wt% of elastomer
This article evaluates the impact-induced damages and influence of titanium skin layer on impact damages in FRP layer of Fibre-Metal Laminates based on titanium alloys and glass fibre-reinforced polym
In order to investigate the ballistic characteristics of T300/epoxy composite laminates, three kinds of stacking sequence composite laminates were impacted by a projectile with a velocity of 10-300 rn
This study reports the cell performance of direct methanol alkaline fuel cells (DMAFCs) employing hydroxide conducting membranes.The membrane electrode assemblies (MEA) consisted of carbon-supported p
A PEMFC (Polymer Electrolyte Membrane Fuel Cell) stack is composed of GDL (Gas Diffusion Layer), MEA (membrane electrode assemblies), and bipolar plates.The electrical resistance of bipolar plates for
A procedure for constructing the asymmetric and nonlinear constant fatigue life (CFL) diagram for a given composite laminate on the basis of the static strengths in tension and compression and the ref
In structural repair procedures, the damaged material in the component is usually removed before the repair can be installed.This results in the presence of hole(s) in the parent laminate for through-