【摘 要】
:
Reducing localized corrosion such as inter-granular corrosion without sacrifice of strength and other good mechanical properties is an important issue for manufacturing the Al-Mg-Si-Cu alloys of high
【机 构】
:
Hunan University, China
【出 处】
:
15th International Conference on Aluminium Alloys(ICAA15)(第十
论文部分内容阅读
Reducing localized corrosion such as inter-granular corrosion without sacrifice of strength and other good mechanical properties is an important issue for manufacturing the Al-Mg-Si-Cu alloys of high quality.It is demonstrated that a significant improvement of corrosion resistance in combination with high strength and good ductility can be achieved for Al-Mg-Si-Cu alloys by optimizing conventional rolling and ageing processes.
其他文献
The intermetallic compound Al2Au, also known as purple gold, has elicited much interest due to its unusual optical properties.The precipitation of this compound in Al alloys, however, for example in i
The effect of phosphorus on primary silicon, phosphorus and mischmetal (Ce-50La) modification on primary and eutectic silicon and cooling rate on microstructure of Al-25%Si are investigated.The result
The aim of this work is to investigate the effect of different casting speed in DC casting process and solution heat treatment of in situ Al-13.9%Mg2Si composite.The increasing of DC casting speed not
The 6063 aluminium alloy is one of the most common raw materials for extruded products.Homogenization is a heat treatment process that improves billet properties for extrudability and good surface fin
A 7075 Al alloy ingot with a diameter of 100 mm was produced without and with the application of combined electromagnetic fields (CEMF) by horizontal direction chill (HDC) casting process.The effect o
Al-Si alloys with Si content more than 13% are hypereutectic alloys.In recent years, these alloys have gathered great attention due to their excellent properties in the transportation industry.The pro
P-doped γ2Al2O3 was found to be a potent substrate to nucleate primary silicon whilst good modification of the eutectic matrix is retained during solidification of hypereutectic Al-Si alloys.On using
Aluminium alloys are frequently used in the transportation industries because they are light in weight and easy to be processed and recycled, and they are commonly subject to anodizing treatment to en
In this paper, the morphology, distributions and sizes of precipitated phase (Mg2Si) in 6181 aluminum alloy strips manufactured by twin roll casting (TRC) process without and with electric pulse curre
The effects of grain size and texture on the corrosion properties of an Al-Cu-Mg-Si alloy were investigated.Different grain size and various crystallographic orientations were produced through a novel