【摘 要】
：
This paper presents the development of a highly efficient method for analyzing load distributions in multi-bolted composite joint using 2D-FE model.In the model, the bolt was modeledby using a fastene
【机 构】
：
School of Astronautics,Northwestern Polytechnical University,Xi'an 710072,China
【出 处】
：
第二届中国国际复合材料科技大会 (CCCM-2)
论文部分内容阅读
This paper presents the development of a highly efficient method for analyzing load distributions in multi-bolted composite joint using 2D-FE model.In the model, the bolt was modeledby using a fastener element.A link element was used to connect two fastener elements,modelling the bolt shear and bending stiffness.The link elements stiffness was calculated through asingle bolt joint detailed 3D-FE analysis.
其他文献
基于二维有限元分析模型,提出了一种快速预测复合材料多钉连接钉载分配的分析方法.螺栓采用Fastener单元和Link单元模拟.Fastener单元模拟螺栓和孔之间的挤压作用,Link单元则模拟螺栓的剪切和弯曲刚度.Link单元的刚度通过单钉连接的三维细节分析模型计算得到,以捕捉螺栓端头形式、次弯曲等因素对钉载分配的影响.最后模型通过三维有限元模型和试验数据进行了校核和验证,结果显示所提出的二维模型
For validating an invented joint for sectional wind turbine blades, a separated composite box-beam with new characteristics was designed and fabricated for the first time,which were composed of metal
Due to its high load-carrying efficiency, multi-step bonded joints are widely used in composite joints and repairs.A new multi-step manufacturing process was introduced, with which a sharp comer could
By establishing the representative volume element (RVE) model of three-dimensional (3D) six-directional braided composites, stiffness prediction of the composite under different braiding angle and fib
MnO作为一种过渡金属氧化物,其比容量高(理论容量756 mAh·g-1,是石墨的2倍)、密度大(5.43g·cm-3)、电动势低(1.032Vvs.Li+/Li)、环境友好[1].而广西的锰资源占全国锰矿资源的三分之一,居全国首位,高附加值MnO/C负极材料的开发,可为锰资源的开发利用提供新的发展思路,促进我国及广西锰资源的深加工利用,具有良好的应用前景.针对目前文献中报道的MnO负极材料存在电
Lithium-ion batteries are widely used in modern instruments and devices because of their long lifetime,environmental benignity and high energy density.In recent years,intensive research has been condu
Despite most porous silicon-based anode materials manifest excellent lithium-ions storage properties and have great potential application in the next generation lithium-ion batteries,the scalable and
目前商业化锂离子电池负极材料多使用石墨类碳材料,由于受到材料比容量低的限制(石墨类碳材料的理论容量仅为372mAh/g),不能满足高容量锂离子电池的需求.过渡金属氧化物具有较高的可逆比容量( 500-1OOOmAh/g),作为锂离子电池负极材料早有研究,但工作电压较高.复合过渡金属氧化物能综合运用各种单一过渡金属氧化物的电化学活性,很有可能成为下一代极具潜力的高比能量、高比功率锂离子电池负极材料[
As the increasing demands for large-scale energy applications such as electric vehicles(EVs) and hybrid electric vehicles(HEVs),it is critical to develop electrodes with high capacity and rate capabil
Natural fiber reinforced composites undergo remarkable mechanical degradation with large amounts of moisture absorption.Existing experimental evidence shows that such mechanical degradation largely de