论文部分内容阅读
环氧树脂由于固化后呈现出三维交联网络结构，呈现出质脆及耐磨性能较差的缺点，限制了其广泛应用。为了克服上述缺点，本文主要研究了羧基化碳纳米管的加入对环氧树脂复合材料拉伸强度和耐磨性的影响。
碳纳米管的羧基化对环氧树脂复合材料拉伸强度及耐磨性的影响
【摘 要】
：
环氧树脂由于固化后呈现出三维交联网络结构，呈现出质脆及耐磨性能较差的缺点，限制了其广泛应用。为了克服上述缺点，本文主要研究了羧基化碳纳米管的加入对环氧树脂复合材料拉伸强度和耐磨性的影响。
【机 构】
：
天津工业大学材料科学与工程学院、中空纤维膜材料与膜过程省部共建国家重点实验室培育基地,天津300387
【出 处】
：
2014中国功能材料科技与产业高层论坛
【发表日期】
：
2014年2期
其他文献
Process optimization for thepreparation of Vanadium Nitride from Vanadium Pentoxide using response s
Process optimization of the synthesis of vanadium nitride from vanadium pentoxide and carbon black using microwave carbothermal nitridation method at atmospheric pressure was performed using response
In this paper, tensile properties at room temperature and bending rupture properties of single crystal aluminum wire, 4mm in diameter, fabricated by ohno continuous casting were studied, and its fract
以有机碱二乙烯三胺(EDTA)为碱源,Sm(NO3)3·6H2O为钐源,在不同模板剂辅助条件下采用水热-热处理相结合的方法进行Sm2O3纳米晶的可控合成。利用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)和Lambda 950分光光度计分别对产物的物相、形貌和光学性能进行表征,并研究了未添加模板剂和分别以六亚甲基四胺(HMTA)、聚乙烯吡咯烷酮(PVP)和十六烷基三甲基溴化铵(CTAB)为模板
Epoxy protective coatings incorporated with polyaniline nanowires were prepared and characterized.Diglycidyl ether of bisphenol A was used as matrix epoxy and phenalkamine synthesized from cardanol wa
本文采用水热法制得了具有较高光催化活性的4ZnO·B2O3·H2O,并采用XRD、SEM对产物的晶相组成和显微型貌进行了表征,研究了不同前驱液pH值条件下的制得的4ZnO· B2O3·H2O晶体在紫外光下分别对三种有机染料(亚甲基蓝、罗丹明B和甲基橙)的光催化性能,并首次测试了所制4ZnO·B2O3· H2O晶体的禁带宽度。
以SnCl4·5H2O和NH3· H2O为主要原料，水为反应介质，在微波水热条件下研究了不同反应温度对SnO2的结构和光催化性能的影响。利用X射线粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和光催化反应仪等对产物进行表征测试。
The growth of microarc oxidation (MAO)coatings on aluminum substrates was controlled via changing solution temperature from 10 to 60 ℃.The results show that an elevation of the temperature lowers the
To understand doped PbS/CdS:X (Bi, Ag)quantum dot better and how to choose appropriate doped elements, its necessary to analyze internal electronic transmission of doped quantum dot.
Stable and uniformly dispersive silvernanoparticleswereprepared though reducing silver nitrate with polyvinylpyrrolidone.The effects of preparing conditions on the stability of silver nanoparticles we
This paper focus on choosing the optimum forming temperature, drawing speed and installing the appropriate apparatus to control the thickness and shrinkage in the process of drawing flexible glass.