【摘 要】
：
Since its invention in 1908, calcium aluminate cement (CAC) has been used as a full binder to formulate materials in a wide range of niches applications like monolithic refractories, rapid concrete, c
【机 构】
：
Kerneos Research Center, Vaulx Milieu, France Ker
【出 处】
：
The 14th International Congress on the Chemistry of Cement (
论文部分内容阅读
Since its invention in 1908, calcium aluminate cement (CAC) has been used as a full binder to formulate materials in a wide range of niches applications like monolithic refractories, rapid concrete, corrosion resistance lining etc....CAC has also been used in the last three decades as a compound of formulated binders combining CAC, Portland cement (OPC) and calcium sulfate (C$Hx) leading to the formation of ettringite.The development of this hydrate can lead to various properties like rapid setting and hardening, rapid drying or shrinkage compensation.Thanks to this technology, special construction mortars have been successfully developed over the years, for example self-leveling compounds with time to service as rapid as a few hours.In this context CAC can be seen as key precursor for the reaction leading to ettringite.This paper gives an overview of the different hydration reactions involved in ettringite formation and the link with applicative properties.It is shown that depending on the binder composition (relative % of CAC, OPC, C$Hx) or the raw material selection (for example C$Hx type), the hydration path and the subsequent microstructure can be very different with an important impact on properties.
其他文献
Calcium aluminate cements (CAC) are commonly used in building chemistry applications like self-levelling overlayment or underlayment, tile adhesive, special mortars In these applications specific prop
The development of alternative and greener cementitious materials based on industrial wastes is one way to reduce the environmental impact of the building sector.The main objective of this work is to
In the context of managing radioactive waste from old UNGG (Uranium Naturel / Graphite / Gaz) reactors, the best conditioning solutions have to be found.Classic solution for low and medium waste activ
"BYF" clinker, mainly composed of belite, yeelimite and calcium alumino-ferrite, is a low-CO2 alternative to Portland cement clinker.Simple BYF cements are made by adding calcium sulfate to BYF clinke
In the last years a remarkable number of radical approaches towards low CO2-cements was introduced to the cement research community.These raised attention in both industry and politics, due to the pro
Magnesium phosphate cements (MPCs) are receiving increasing attention because of their outstanding properties of fast setting and hardening, good volume stability and excellent bonding to old concrete
Calcium sulfoaluminate (CSA) cements, that require less energy and produce less CO2 than Portland cement during their manufacture, are receiving increasing attention in the context of sustainable deve
The identification of eco-compatible cement is a relevant issue in the field of building materials research.Cement formulations based on reactive periclase (MgO) constitute one of the most promising e
Calcium sulphoaluminate cement (CSA) are considered one of the possible and eco-friendly alternative to Ordinary Portland Cements (OPC) for mortar and concrete applications, thanks to the rapid-harden
Calcium sulphoaluminate cements (CSA) can represents a potential valid substitution for OPC in the global challenge of CO2-emissions reduction and an opportunity for waste recycling.However the renewe