Submerged hydraulic jump with sediment-laden flow

来源 :International Journal of Sediment Research | 被引量 : 0次 | 上传用户:allenwyh
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this experimental study,the effect of suspended sediment concentration on the characteristics of a submerged hydraulic jump in a rectangular channel has been investigated,based on the sediment concentrations of 0.43%-16.15%and jet Froude numbers were in the range of 1.9-5.Two grain sizes, 0.15 and 0.03 mm(ρ_s=2.65 g/cm~3) have been used in the experiments.Characteristics of the submerged hydraulic jump including the submergence depth at the gate,length of submerged hydraulic jump,energy dissipation,velocity,and concentration distribution have been studied in both smooth and rough beds.Results showed that the submergence depth at the gate and the energy dissipation were constant regardless of sediment concentration.However,in the presence of suspended sediment,the length of the submerged hydraulic jump is smaller than that of clear water flow.It was also found that suspended sediment increase flow resistance,as a result of decreased in the maximum flow velocity. In this experimental study, the effect of suspended sediment concentration on the characteristics of a submerged hydraulic jump in a rectangular channel has been investigated, based on the sediment concentrations of 0.43% -16.15% and jet Froude numbers were in the range of 1.9-5 . Two grain sizes, 0.15 and 0.03 mm (ρ_s = 2.65 g / cm ~ 3) have been used in the experiments. Characteristics of the submerged hydraulic jump including the submergence depth at the gate, length of submerged hydraulic jump, energy dissipation, velocity , and concentration distribution have been studied in both smooth and rough beds.Results showed that the submergence depth at the gate and the energy dissipation were constant regardless of sediment concentration. However, in the presence of suspended sediment, the length of the submerged hydraulic jump is smaller than that of clear water flow. It was also found that suspended sediment increase flow resistance, as a result of decreased in the maximum flow velocity.
其他文献
A novelty technique,namely,pre-oxidation,has been proposed to improve the strength and thermal shock behavior of ZrB2-SiC-graphite ceramic composites,which is a
Ball bearings are widely employed mechanical components characterized by high precision and quality,and usually play important roles in various rotary machines
Servo scanning 3D micro electrical discharge machining (3D SSMEDM) is a novel and effective method in fabricating complex 3D micro structures with high aspect r
In nature,to realize the smooth motion for different speeds,the continuous gait transition is usually required for the 0quadrupeds.Thus,the gait simulation of q
The traditional inspection methods are mostly based on manual inspection which is very likely to make erroneous judgments due to personal subjectivity or eye fa
Directional solidified turbine blades of Ni-based superalloy are widely used as key parts of the gas turbine engines.The mechanical properties of the blade are
An adaptive fuzzy tracking control scheme is presented for a class of switched multi-input-multi-output (MIMO) nonlinear systems with disturbances under arbitra
Zinc-indium-tin oxide (ZITO) films were grown by pulsed-laser deposition. Three different material compositions were investigated: ZITO-30, ZITO-50 and ZITO-70
Based on variable sized chunking,this paper proposes a content aware chunking scheme,called CAC,that does not assume fully random file contents,but tonsiders th
The increasing strength of new structural materials and the span of new structures,accompanied by aesthetic requirements for greater slenderness,are resulting i