论文部分内容阅读
瑞士马格(Maag)公司SD-62型磨齿机的齿面修形机构是由机械和液压传动两部份组成,该机构的液压传动原理介绍如下。 1.SD-62型磨齿机齿面修形的液压传动原理和调整 SD-62型磨齿机齿面修形机构由齿形修形机构、即B修形机构和齿向修形机构,即C修形机构两部份组成,分别用来对被磨齿轮的齿面进行齿形修形和齿向修形。齿形修形时仅B修形机构动作,齿向修形时仅C修形机构动作,齿形和齿向同时修形、即B+C修形时,B、C修形机构同时动作。B修形机构和C修形机构均各自有发讯机构和执行机构。B、
The tooth profile modification mechanism of the Maag SD-62 gear grinding machine consists of two parts, mechanical and hydraulic. The principle of hydraulic transmission of the mechanism is described as follows. 1.SD-62-type gear grinding machine tooth surface modification of the hydraulic transmission principle and adjust the SD-62-type gear grinding machine tooth surface modification mechanism by the tooth-shaped body repair, that is, B-shaped body and tooth-shaped gear modification agencies, That is, C repair mechanism composed of two parts, respectively, for the gear to be ground gear tooth profile and tooth profile modification. When the tooth profile is modified, only the B profile modification mechanism moves. When the profile modification is performed, only the profile modification mechanism moves while the profile and tooth profile are modified simultaneously. That is, when the profile B + C is repaired, the profile modification mechanisms B and C move simultaneously. B repair agencies and C repair agencies have their own hair agency and implementing agencies. B,