东京工业大学工学部开发出适用于燃料电池电极用微细孔多孔金属的制造方法。 用这种新方法试制了用作熔融碳酸盐型燃料电池阳极的镍。首先,将胺系聚合物分散在镀镍液中进行复合电镀,把电镀膜剥下来,使其氧化成氧化镍并粉碎,接着加入 Tokyo Institute of Technology Department of Engineering developed for the fuel cell electrode microporous porous metal manufacturing methods. This new method was used to prototype nickel used as the anode for molten carbonate fuel cells. First, the amine-based polymer is dispersed in a nickel plating solution, complex plating is performed, the plating film is peeled off, oxidized to nickel oxide and pulverized, and then