Upconversion Luminescence of YLiF4 :Er3+ Synthesized by Hydrothermal Method

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:shmilygang8751
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
YLiF4: Er3 + was synthesized by hydrothermal method. Concentration of Er3 + is changed from 0 to 5 %. The absorption of Er3+ in all samples from 200 to 1200 nm was measured at room temperature. The J-O parameters calculated from absorption spectrum areΩ 2 = 1.05 × 10- 20 cm2, Ω4 = 1.25 × 10- 20 cm2 andΩ6 = 1.35 × 10- 20 cm2. Infrared-to-visible upconversion emission of YLiF4: Er3 + was observed when excited by 980 nm. The results show that the Er3 + content is less than 1.5 %, excite-state absorption is the main mechanism of upconversion emission. When Er3 + content is larger than 1.5 %, both of the excite-state absorption and energy transfer lead to the upconversion luminescence. The upconversion intensity was enhanced with the increasing of Er3 + concentration. At room temperature, the lifetime of 2H11/2 and 4S3/2is 205μs while that of 4F9/2 is 188μs for sample Er-2. The transition rates and quantum efficiency were also calculated.The quantum efficiencies of 4S3/2 and 4F9/2 are 27.9% and 10.7%, respectively.
其他文献
Prediction of melt index (MI), the most important parameter in determining the products grade and quality control of polypropylene produced in practical industr
A series of Co/Si/(Co/Cu/Co) multilayers and Co/Si/Co sandwiches were prepared by high vacuum electron-beam evaporation. It was found that a Si spacer (≥0.9nm)
Distributed inverted index technology is used in many peer-to-peer (P2P) systems to help find rapidly document in -set search system for peer-to-peer networkswh
Datapath accounts for a considerable part of power consumption in VLSI circuit design. This paper presents a method for physical implementation of datapath to a
The conjugation of semi-solid process technique and casting-rolling technique applied to produce the magnesium strips was studied. The semi-solid slurry hasbeen
By adopting an equivalent geometry model of machining process and considering thermo-plastic properties of the work material, a finite element method(FEM) to st
Nanostructured (NS) W-Cu composite powder was prepared by mechanical alloying (MA), and nanostructured bulk of W-Cu contact material was fabricated by hot press
In order to evaluate the degree and severity of Al-Mg-Mn-Sc-Zr alloy in exfoliation corrosion(EXCO) solution quickly and nondestructively, electrochemical imped
The TiB2 dispersion-reinforced copper-matrix composite used as electrode material in resistance spot welding of zinc coated steels was studied. The service life
Layered LiNi1/3Co1/3Mn1/3O2 materials were synthesized using a nickel-cobalt-manganese carbonate precursor obtained by chemical co-precipitation. The [Ni1/3Co1/