【摘 要】
:
为了解新型难变形镍基高温合金ЭК151的铸态组织特点,并为制定均匀化工艺打下理论基础,本文利用光学显微镜、扫描电镜和能谱分析研究了ЭК151合金铸锭的偏析特征;通过1100~
【机 构】
:
钢铁研究总院高温材料研究所,总参陆航驻株洲军事代表室,中国南方航空工业(集团)公司,
论文部分内容阅读
为了解新型难变形镍基高温合金ЭК151的铸态组织特点,并为制定均匀化工艺打下理论基础,本文利用光学显微镜、扫描电镜和能谱分析研究了ЭК151合金铸锭的偏析特征;通过1100~1250℃的均匀化实验和不同温度均匀化过程的元素扩散动力学计算,研究了合金的均匀化工艺。结果表明,ЭК151合金凝固过程中,Nb、Mo、和Ti等元素在枝晶间偏析,并形成大量的γ′+γ共晶相;为保证γ′相、共晶相回溶彻底,元素扩散充分,需要在1200℃以上进行均匀化处理;针对Nb元素的扩散动力学计算结果给出了不同温度均匀化处理所需要的时间。
In order to understand the as-cast microstructure of the new type of hard-deformation nickel-base superalloy ЭК151 and lay a theoretical foundation for the development of homogenization process, the segregation characteristics of ЭК151 alloy ingot were studied by optical microscope, scanning electron microscopy and energy spectrum analysis. 1250 ℃ homogenization experiment and elemental diffusion kinetics calculation under different temperature homogenization process, the alloy homogenization process was studied. The results show that Nb, Mo, Ti and other elements segregate between dendrites and form a large amount of γ ’+ γ eutectic phase during the solidification of ЭК151 alloy. In order to ensure the γ’ phase, the eutectic phase is completely dissolved and the elements diffuse Sufficient, it needs to be homogenized above 1200 ℃; the diffusion kinetics calculation result of Nb element gives the time needed for different temperature homogenization treatment.
其他文献
Our previous work proved that high adsorption capacity and uptake rate of lysozyme were achieved on alginate (Alg)-grafted resin with an ionic capacity (IC) of
The usage of capillary tubes for CO2 absorption suffers from small residence time,which leads to reduced performance for large throughput.This work presents a m
2月25日,广州硬笔书法家协会、广州天河区书法家协会在广州龙逸山庄隆重召开2006年新春茶话会,省文化学会常务副会长魏毅、省书法家协会副主席丘仕坤,省民营企业家文化促进
请下载后查看,本文暂不支持在线获取查看简介。
Please download to view, this article does not support online access to view profile.
The quality standards for Fructus Corni have been established based on the effects of the manufacturing processes.Three critical process parameters (CPPs) of ex
请下载后查看,本文暂不支持在线获取查看简介。
Please download to view, this article does not support online access to view profile.
In order to further understand the effect of solid impurities on pipeline wall during erosion,the particle impact process without fluid was extracted for specif
Objective:The aim of this study was to evaluate the effects and safety of brucea javanica oil,mitomycin and BCG for preventing postoperative relapse of superfic
Growth process of the NaY zeolite membranes was investigated by fluoride-containing precursor synthesis gel.Compared with the fluoride-free precursor synthesis
This study presents a novel technique for the controllable preparation of photoluminescent substrates to enhance the photochemical microfluidic synthesis of vit