【摘 要】
：
Porous calcium phosphate ceramics were produced by compression molding using a special mold followed by sintering. The porous calcium phosphate ceramics have th
【机 构】
：
Institute for Human Science and Biomedical Engineering,Research Institute for Cell Engineering,Depar
论文部分内容阅读
Porous calcium phosphate ceramics were produced by compression molding using a special mold followed by sintering. The porous calcium phosphate ceramics have three-dimensional and penetrated open pores380-400μm in diameter spaced at intervals of 200μm. The layers of the linear penetration pores alternately lay perpendicular to pore direction. The porosity was 59%-65% . The Ca/P molar ratios of the porous calcium phosphate ceramics range from 1.5 to 1.85. A binder containing methyl cellulose was most effective for preparing the powder compact among vinyl acetate, polyvinyl alcohol, starch, stearic acid, methyl cellulose and their mixtures. Stainless steel, polystyrene, nylon and bamboo were used as the long columnar male dies for the penetrated open pores. When polystyrene, nylon and bamboo were used as the long columnar male dies, the dies were burned out during the sintering process. Using stainless steel as the male dies with the removal of the dies before heat treatment resulted in a higher level of densification of the calcium phosphate ceramic.
其他文献
A series of alumina-zirconia composites with various grain sizes were prepared from the nano-sized powders with different agglomerations. Microstructural analys
La0.68Pb0.32FeO3 samples annealed at different temperature were prepared using citrate sol-gel method. With increasing of annealing temperature from 200 to 1000
An electrolyte model for the solid oxide fuel cell (SOFC) with proton conducting perovskite electrolyte is developed in this study, in which four types of charg
This work aims at designing a set of curing pressure routes to produce laminates with various void contents. The effects of various consolidation pressures resu
Detecting objects of interest from a video sequence is a fundamental and critical task in automated visual surveillance.Most current approaches only focus on di
The effects of trace silver and magnesium additions on the microstructure and mechanical properties of the Al-Cu-Li alloys were investigated. The experimental r
Fe-6.5wt%Si composite compact was fabricated by spark plasma sintering(SPS).Mechanical alloying(MA)was used to prepare Fe-Si composite powders.The composite pow
Clustering, as a powerful data mining technique for discovering interesting data distributions and patterns in the underlying database, is used in many fields,
The optimal scheduling of multi-product batch process is studied and a new mathematics model targeting the maximum profit is proposed, which can be solved by th
The stress corrosion cracking (SCC) behaviour of X-70 pipeline steel in near-neutral pH solutions was studied via slow strain rate testing (SSRT). The results s