The sinter quality is important for its performance in a blast furnace,and optimizing ore matching is a main way to ensure the quality and yield of sinter ore and to reduce the cost of ore matching.The research on optimizing ore matching for a 550 m~2 sintering machine in Shougang Jingtang was carried out in this paper. Firstly,based on the condition of iron ore resourse in Shougang,sintering properties of various ores,especially the high temperature properties were researched,and basic structure of ore matching was determined according to the mutual complementary properties of assimilation and liquid phase fluidity among Australia ore,Brazilian ore and domestic concentrates,that was Australian ore(50%-60%) + Brazilian ore(40%-30%) + domestic concentrates(about 10%).Secondly,9 groups of ore matching schemes were designed and sintering pot tests were carried out,and then the starting scheme of the 550 m~2 sintering machine was obtained:ore from southern Brazil (20%) +ore from northern Brazil(10%) + semi-limonite(20%) + limonite ore(35%) + domestic concentrates (15%).Thirdly,experiment of optimizing parameters of optimizing basicity,lime ratio,water addition and bed depth were carried out,and 9 groups of ore matching schemes were designed.The results showed that parameters fit for Jingtang currently are as follows:binary basicity is 1.9 - 1.95,lime ratio and water addition is 5%and 7.0% respectively;sintering bed should increase to 800 mm gradually.At last,Jingtang sintering plant was put into production successfully and yields stably,with the bed depth of 800 mm and advanced sintering indexes. The sinter quality is important for its performance in a blast furnace, and optimizing ore matching is a main way to ensure the quality and yield of sinter ore and to reduce the cost of ore matching. The research on optimizing ore matching for a 550 m ~ Firstly, based on the condition of iron ore resourse in Shougang, sintering properties of various ores, especially the high temperature properties were researched, and basic structure of ore matching was determined according to the mutual complementary properties of assimilation and liquid phase fluidity among Australia ore, Brazilian ore and domestic concentrates, that was Australian ore (50% -60%) + Brazilian ore (40% -30%) + domestic concentrates (about 10%). Secondly, 9 groups of ore matching schemes were designed and sintering pot tests were carried out, and then the starting scheme of the 550 m ~ 2 sintering machine was obtained: ore from southern Brazil (20%) + ore from northern B Thirdly, experiment of optimizing parameters of optimizing basicity, lime ratio, water addition and bed depth were carried out, razil (10%) + semi- limonite (20%) + limonite ore (35% and 9 groups of ore matching schemes were designed. The results showed that parameters fit for Jingtang currently are as follows: binary basicity is 1.9 - 1.95, lime ratio and water addition is 5% and 7.0% respectively; sintering bed should increase to 800 mm gradually.At last, Jingtang sintering plant was put into production successfully and yields stably, with the bed depth of 800 mm and advanced sintering indexes.