c.高低亮度反复调整,直到上面两点均满足要求3YPbPr色温调整:在YPbPr信源下用2329或360A输入1080 i/30 Hz t6阶灰阶信号。方法同VGA色温调整。[SHOP(出厂设置)]SHOP是工厂调试的最后一个步骤,完成其他所有调试项目后,执行SHOP,除白平衡、ADC、Device ID等于本机特征相关的数据外,所有数据都按出厂要求初始化为统一的值。[NVM reset]该项目用于机器出现软件数据错误的情况,出现此类故障现象时可执行该项操作,则除白平衡、ADC等与本机特征相关的数据外,其他所有数据将被初始化 c. The level of brightness repeatedly adjusted until the above two points to meet the requirements 3YPbPr color temperature adjustment: YPbPr source with 2329 or 360A input 1080 i / 30 Hz t6 gray-scale signal. Method with VGA color temperature adjustment. [SHOP (Factory Setting)] SHOP is the final step in factory commissioning. After all other debug items have been completed, SHOP is executed. All data except the white balance, ADC, and Device ID are related to the features of this unit. For the same value. [NVM reset] This item is used when the machine has the wrong software data. When this kind of fault phenomenon occurs, all the data will be initialized except the data related to the native features such as white balance and ADC