Deformation behavior of TiNiFe alloy in isothermal compression

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:luoqiaoshui
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The hot deformation behavior of TiNiFe shape memory alloy was studied by isothermal compression tests.It was performed on a Gleeble-3500 thermal simulation machine at deformation temperature of 750 to 1 050 ℃ and strain rate of 0.01 to 10.00 s 1 with maximum strain of 0.8.Deformation mechamism was investigated by the aid of true stress-true strain curves,kinetic analysis and processing map.The constitutive relationship was established in the form of Arrhenius-type hyperbolic-sine equation,and the apparent activation energy was calculated to be approximately 200 kJ·mol-1.The processing maps of TiNiFe alloy were appreciably influenced by true strain.
其他文献
The 1∶2 subharmonic resonance of the labyrinth seals-rotor system is investigated,where the low-frequency vibration of steam turbines can be caused by the gas
Effect of element cerium (Ce) on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy (TEM),
The hot dipping process of pure aluminum on H13 steel substrates followed by plasma electrolytic oxidation(PEO)was studied to form alumina ceramic coatings for
The combined effects of (Y,Cu) on the microstructure and room-temperature mechanical properties of the NiAl intermetallic compound under uniaxial compression st
The fact that there are Mn2+ at the A sites in the ABO3 perovskite phase of manganites with the nominal composition La0.6-xNdxSr0.1MnO3 showed by detailed exper
To improve the segmentation quality and efficiency of color image,a novel approach which combines the advantages of the mean shift (MS) segmentation and improve
Numerical simulation combined with experimental test was carried out to analyze the pre-stretching process of the 7075 aluminum alloy sheet,from which the stres
The characteristics of inclusions in high-Al steel refined by electroslag remelting (ESR) were investigated by image analysis,scanning electron microscopy (SEM)
Cu-based and Cu-alloy-based diamond composites were made by high-pressure-high-temperature (HPHT) sintering with the aim of maximizing the thermal conductivity
By utilizing the time difference of arrival (TDOA) and frequency difference of arrival (FDOA) measurements of signals received at a number of receivers,a constr