【摘 要】
：
As secondary mineral resources, diatomite tailings (DT) got from the Linjiang region of China were prepared and characterized by SEM, XRF and XRD. Mono-factor experiments were carried out to investigate the effects of the operation factor, including conta
【机 构】
：
School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, Chi
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
As secondary mineral resources, diatomite tailings (DT) got from the Linjiang region of China were prepared and characterized by SEM, XRF and XRD. Mono-factor experiments were carried out to investigate the effects of the operation factor, including contact time, adsorbent concentration, initial pH value of the dye solutions, adsorption temperature and initial concentration of cationic Red X-GRL (X-GRL) on the adsorption of X-GRL. The adsorption kinetics, isotherms, thermodynamics and mechanisms for X-GRL were also studied. It was efficient for DT to adsorb X-GRL from aqueous solutions, and it was even discovered to have higher adsorptivity for X-GRL than diatomite concentrate (DC) in our previous test. The adsorption processes fit very well with the pseudo-second-order model and the Langmuir isotherm equation. In addition, various thermodynamic parameters, such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°) and standard entropy (ΔS°) have been calculated. From thermodynamic studies, it was seen that the adsorption was spontaneous and endothermic. The main driving forces of the physical adsorption on DT are electrostatic attraction. The reason why DT showed higher adsorptivity for X-GRL than DC was that there were more clay mineral particles within, which has a remarkable ability of dye adsorption due to its high surface area. DT as a cheap absorbent for X-GRL removal would replace or partially replace the activated carbon.
其他文献
A simple non-isocyanate route synthesizing thermoplastic polyurethanes(TPUs)with good thermal and mechanical properties is described.Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate with 1,4-butanediol and 1,6-hexanediol was c
The Cu-15Cr in-situ fiber-reinforced composites sheets were prepared by cold drawing combined with cold rolling process. The evolution process of Cr fibers was studied, and when cold rolling reduction ε = 95％, the morphology of Cr fiber at different annea
A facile microwave-assisted hydrothermal route has been developed for a synthesis of versatile carbon materials. The monosaccharide fructose aqueous solution was adopted as the starting material, and the pH of the solution was adjusted to be in acidic (pH
Electropulsing is introduced into the cutting process for quenched and tempered 45 steel, which is a novel method to improve the material machinability compared with the conventional cutting process. The effects of electropulsing on cutting performances,
By using oxalate group-modified TiO2 nanoparticles as the dispersing phase, different kinds of silicone oil with various viscosities and terminal groups (hydroxyl, hydrogen, and methyl) were used as the dispersing media to prepare different electrorheolog
The changes of resistivity of conductive asphalt concrete at different temperatures were studied, and positive temperature coefficient (PTC) model was established to estimate the influence of temperature on the resistivity quantitatively, which eliminated
The correlation between the stress concentration and the spontaneous magnetic signals of metal magnetic memory (MMM) was investigated via tensile tests. Sheet specimens of the Q235 steel were machined into standard bars with rectangular holes to obtain va
Corrosion behavior of 300M in neutral corrosion environments containing NaCl simulated by total immersion (TI), salt spraying (SS) and periodic immersion (PI), was investigated by surface analysis techniques, corrosion weight-loss method, and electrochemi