【摘 要】
：
Martensitic transformations,mechanical properties,shape memory effect and superelasticity of Ti-xZr-(30-x)Nb-4Ta (x =15,16,17 and 18;at％) alloys were investigate
【机 构】
：
School of Mechanical Engineering, Xi’an Shiyou University,Xi’an 710065, China;School of Materials Sc
论文部分内容阅读
Martensitic transformations,mechanical properties,shape memory effect and superelasticity of Ti-xZr-(30-x)Nb-4Ta (x =15,16,17 and 18;at％) alloys were investigated.X-ray diffraction (XRD),optical microscopy (OM) and transmission electron microscopy (TEM) results indicated that the Ti-16Zr-14Nb-4Ta,Ti-17Zr-13Nb-4Ta and Ti-18Zr-12Nb-4Ta alloys were mainly composed of α″-martensite,while the Ti-15Zr-15Nb-4Ta alloy was characterized by predominant β phase.The reverse martensitic transformation temperatures increased when Nb was replaced by Zr,indicating stronger β-stabilizing effect for the former.The Ti-15Zr-15Nb-4Ta alloy displayed superelasticity during tensile deformation with a recovery strain of 3.51％.For the other three alloys with higher Zr content,the martensitic reorientation occurred during tensile deformation,resulting in shape memory recovery upon subsequent heating.The maximum shape memory effect was 3.46％ in the Ti-18Zr-12Nb-4Ta alloy.
其他文献
白钨矿高效分解的关键在于矿中Ca和W的有效分离.传统的白钨矿苏打烧结法是通过在焙烧过程中添加二氧化硅,使白钨矿中的CaWO4分解成易溶于水的Na2 WO4和xCaO·ySiO2二元渣,但
以乙酰丙酮铁(Fe(acac)3)和氯铂酸(H2PtCl6·6H2O)作为Fe源和Pt源,硼氢化钠(NaBH4)作为还原剂,PVP作为表面活性剂,通过化学还原法制备出单分散的FePt纳米颗粒,研究PVP对FePt
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
Based on the ABAQUS/explicit finite element method,the deep drawing of 6A 16 alloy pre-aged and then storaged at room temperature for 1 week with various blank-
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
采用电沉积、热处理与HCl腐蚀相结合的方法制备了具有纳米孔隙结构的复合多孔泡沫NiZn合金电极,用扫描电子显微镜（SEM）观测了电极的表面形貌,用能谱分析（EDS）研究了电极成分,采用
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生、测量监控等方面人手,介绍了S226海滨大桥
研究了欠驱动无人水下航行器(unmanned underwater vehicle,UUV)在3维空间中的路径跟踪控制器设计及其稳定性分析问题.首先建立2阶积分器形式的欠驱动UUV空间6自由度运动模型
采用高功率脉冲磁控溅射(HPPMS)技术,在铝合金基体上制备V薄膜.研究溅射气压对V薄膜相结构、表面形貌及摩擦学性能的影响.结果表明:不同气压下制备的V薄膜中的V相仅沿(111)晶