对800轧机液压压下稳定性问题的探讨

来源 :重型机械 | 被引量 : 0次 | 上传用户:xiaogengwhy
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文以800轧机液压压下实测频率特性分析为基础,对轧机液压压下稳定性若干问题作了探讨,并得出以下结论:1.计算油缸负载固有频率ω时,它的运动质量应包括所有受到油缸推动质量的等效和,而不仅仅限于半个辊系,否则计算出的结果,以及由此作出的结论都是不正确的。2.胡维茨(Hurwitz)判据仅限于判定线性系统的稳定性。对于轧机液压压下,由于它存在本质非线性,并且是变参数,又由于它的若干参数只能用实测方法求得,因而用胡维茨判据采用计算求得分析液压压下的稳定性,往往导致错误的结论。3.流量对液压压下频率特性的影响十分显著,因而它是分析液压压下稳定性不可忽视的重要因素之一。 Based on the analysis of measured frequency characteristics of 800 mill hydraulic press, this paper discusses some issues about the stability of mill hydraulic press, and draws the following conclusions: 1. When calculating the natural frequency ω of the load, the quality of its movement should include all The equivalent and not only limited to half a roller system is driven by the mass of the cylinder, otherwise the calculated results and the conclusions reached are not correct. 2. The Hurwitz criterion is limited to the stability of linear systems. As for the rolling mill hydraulic pressure, because of its inherent nonlinear and variable parameters, and because of its parameters can only be obtained using the actual measurement method, and thus calculated using the method of calculating the Weivitz criterion to analyze the stability of hydraulic pressure , Often leads to wrong conclusions. 3. The influence of flow on the frequency characteristics of hydraulic pressing is significant, so it is one of the important factors that can not be ignored in analyzing the stability of hydraulic pressing.
其他文献
由于孕育剂的不断改进,优质高强度灰铸铁发展很快。国外的孕育剂已发展达千种,而国内在这方面还存在较大的差距,至今国内绝大多数工厂基本上是沿用硅铁——出铁槽冲入的孕育
一对相爱50年的恋人,传奇般地在80年代终成眷属,令人赞叹不已。耄耋之年,他们夫唱妇随,合写出了1000多套对联和诗词,开创了联诗合璧的新天地,更是令人叹为观止。他们就是侨居美国纽约的潘力
1986年4月在墨西哥城召开了联合国拉丁美洲和加勒比地区经济委员会第二十一次会议。正如会议文件所指出的,本地区国家正处于持久的、历史上最严重的经济危机之中。1981—198
介绍了道路施工中表现出来的问题;稳定砂砾的施工工艺;黑色路面面层的施工存在的问题及解决方法;道路设计中易疏忽易损坏的部位及解决措施以及加强质量管理的对策。 Introdu
1900年的敦煌,对绝大多数中国人来说是一个遥远陌生的地方;2010年的敦煌,是一个旅游胜地,对许多搞艺术的人来说,这是个灵神向往还有点神秘的 Dunhuang in 1900 was a distan
众所周知,原子吸收光谱法具有高速、准确和选择性好的特点。从文献报道看,用原子吸收法目前可以测定70几种元素,对许多元素而言,测定的灵敏度相当高,约0.01~5微克/毫升。灵敏
1.前言内螺纹钢管的螺纹形状与梯形螺纹基本相似,只是螺纹深度(即齿高)比梯形螺纹小得多(≥0.5mm),螺纹头数为4~6头。内螺纹管有两种,一种外壁带鳍片,另一种外壁不带鳍片(即
建立和推广规范的、全国通用的语言(标准语),是发展教育文化科技事业、繁荣社会经济和提高社会生产力的需要,是任何一个要实现工业化的国家所必须完成的社会历史任务。汉语方
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
铰刀是一种旋转刀具。铰孔是精密加工孔的方法之一,它通常可以加工精度1T6~1T8级,表面粗糙度R_o1.6~0.2。因为它构造简单,制造容易,使用时不需要特殊的设备,故在机械加工中普