论文部分内容阅读
布切奇汽车维修后发现过充电,我们打开电门开关,用手指轻按调节器动铁,若无吸力,说明调整电路有断路。当发动机工作时,一级闭合触点长期处于闭合状态,说明调节器失控,应立即修理。若感觉有吸力(动铁立即吸下),说明调整电路无故障,其故障发生在调整部分。我们采用电流在测量发电机输出电流来进行调整,使发动机在中速运转时输出电流应在15A左右,高速不超过30A。 修理时已确定是调节器故障引起
Buche Qi car repair found overcharged, we open the electric switch, tap the regulator with the fingers moving iron, if there is no suction, indicating that there is a circuit to adjust the circuit. When the engine is working, a closed contact is permanently closed, indicating that the regulator is out of control and should be repaired immediately. If you feel a suction (moving iron immediately suction), indicating no fault adjustment circuit, the fault occurred in the adjustment section. We use the current in the measurement of the generator output current to be adjusted so that the engine output current at medium speed operation should be about 15A, high-speed does not exceed 30A. Repair has been identified as a regulator malfunction