论文部分内容阅读
根据我厂生产条件,在没有动平衡机的情况下,为了解决WG-800卧式刮刀离心机转鼓的动平衡问题,我们经过反复实践,采用了一种简易的动平衡方法。 1.方法的简介 (1)用百分表测定转鼓端的径向摆动量不得大于16丝,轴向跳动量不得大于24丝。 (2)按装配顺序将离心机转鼓直接装在机器自身的轴承中,并用地脚螺钉将离心机紧固在基础上。 (3)将离心机转鼓左侧端面圆周分成三
According to our factory production conditions, in the absence of dynamic balancing machine, in order to solve WG-800 horizontal scraper centrifuge drum balancing problem, we have repeatedly through practice, using a simple balancing method. 1. Introduction to the method (1) The dial gauge shall not oscillate more than 16 wires in the radial direction on the drum end, and the axial runout shall not be greater than 24 threads. (2) Install the centrifuge drum directly in the machine’s own bearings according to the assembly sequence, and fasten the centrifuge on the foundation with anchor screws. (3) Divide the circumference of the centrifuge drum left face into three