Towards Improvement of Photovoltaic Performance of Aqueous Dye-sensitized Solar Cells by Tungsten-do

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:mzh18277648
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Tungsten doped (W-doped) TiO2 mesoporous nanobeads,possessing high surface area and superior scattering effect,were used for photoanode preparation.The W-doping would induce a positive shift of the TiO2 conduction band,and enhance the driving force for electron injection and collection efficiencies.The electrochemical impedance spectra indicated a retarded charge recombination and increased electron diffusion length after W-doping.By fine-tuning the W-doping concentration to 0.25%,aqueous DSCs produced a significant improved the open circuit voltage of 712 mV and a short circuit current of 7.05 mA·cm-2,leading to an overall increased power conversion efficiency of 3.40% at 1 000 W·m-2 simulated irradiation,which is roughly 25% enhancement compared to that without W-doping photoanode.
其他文献
7XXX series aluminium alloys generally present low weldability by fusion welding methods because of the sensitivity to weld solidification cracking, vaporization of strengthening alloys and other defects in the fusion zone. Friction stir welding (FSW) can
Self-deformation cracking is the cracking caused by thermal deformation, autogenous volume deformation or shrinkage deformation. In this paper, an extended finite element calculation method was deduced for concrete crack propagation under a constant hydra
Gold nanoparticles (GNPs) modified hierarchical meso-macroporous (HMMP) SiO2 layer on the surface of Au iflm electrode was developed as a novel enzyme immobilization matrix for biosensors construction. HMMP SiO2-Au bilayer film electrodes were in-situ fab
The amount of inert quartz tailing used in concrete construction is limited due to the low strength development of cementitious materials that may be caused by the quartz tailing. We manage to increase the strength of blended cement by modifying quartz ta
Microstructure evolution and impact toughness of simulated heat affected zone (HAZ) in low carbon steel have been investigated in this study. Thermal simulator was used to simulate microstructure evolution in HAZ with heat input of 10 - 100 kJ / cm weldin
The effect of graphite surface modification on the thermal conductivity (TC) and bending strength of graphite flakes /Al composites (Gf/Al) prepared by gas pressure infiltration were investigated. Al3Ni and Al4C3 phase may form at the interface in Ni-coat
Welan gum is widely applied in environmental admixtures due to its good thickening and rheological properties. With its powerful charge density in the molecular structure, the competitive adsorption between welan gum and other admixtures happened remarkab