A new procedure was proposed for evaluating the weldability of nickel-base superalloys.The theory is on the basis of two microstructural patterns.In pattern I,the weld microstructure exhibits severe alloying segregation,many low-melting eutectic structures,and low weldability.The weld requires a weaker etchant and a shorter time for etching.In pattern II,the weld microstructure displays less alloying segregation,low quantity of eutectic structures,and high weldability.The weld needs a stronger etchant and a longer time for etching.Five superalloys containing different amounts of Nb and Ti were designed to verify the patterns.After welding operations,the welds were etched by four etchants with different corrosivities.The weldability was determined by TG-DSC measurements.The metallography and weldability results confirmed the theoretic patterns.Finally,the etchant corrosivity and etching time were proposed as new criteria to evaluate the weldability of nickel-base superalloys. A new procedure was proposed for evaluating the weldability of nickel-base superalloys. The theory is on the basis of two microstructural patterns. Pattern I, the weld microstructure exhibits severe alloying segregation, many low-melting eutectic structures, and low weldability. weld requires a weaker etchant and a shorter time for etching. pattern II, the weld microstructure displays less alloying segregation, low quantity of eutectic structures, and high weldability. the weld needs a stronger etchant and longer time for etching. FIVE superalloys containing different amounts of Nb and Ti were designed to verify the patterns. After welding operations, the welds were etched by four etchants with different corrosivities. The weldability was determined by TG-DSC measurements. The metallography and weldability results confirmed the theoretic patterns. Finally, the etchant corrosivity and etching time were proposed as new criteria to evaluate the weldability of nickel-base superalloys.