Dielectric and Piezoelectric Properties of 0-3 PZT/PVDF Composite Doped with Polyaniline

来源 :武汉理工大学学报(材料科学版)英 | 被引量 : 0次 | 上传用户:diaro
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Lead zirconate titanate (PZT)/polyvinylidenc fluoride (PVDF) 0- 3 piezoelectric composites doped with polyaniline (PANI) were obtained by hot-press method.The polarization properties of the composites were characterized by XRD and P- E hysteresis loops at room temperature.And the dielectric and piezoelectric properties were also measured.The results show that the poling of PZT could be effectively carried out and the dielectric constant εr and dissipation tanδ increase monotonously by increasing the voltme fraction of PANI in the composite.The piezoelectric constant d33, and the planar electromechanical coupling factor kp increase while the mechanical quality factor Qm decreases with the increase in the content of PANI.The d33 , kp and Qm show the extremum valnes at 8 vol%-10 vol% PANI.
其他文献
【目的】探讨大孔树脂对蛹虫草粗多糖脱色的最佳工艺参数条件。【方法】以脱色率、多糖保留率为指标,利用静态吸附脱色实验对7种大孔树脂进行优选,并通过静态/动态吸附脱色的
【目的】研究以白木香[Aquilaria sinensis(Lour.)Gilg]根为外植体的愈伤组织诱导条件。【方法】选择白木香2种来源的根,考察不同灭菌条件、不同激素浓度组合对愈伤组织诱导
整理由近代第一位来华的新教传教士马礼逊(Robert Morrison)与其同事米怜(William Milne)于1817年在马六甲创办的季刊《印中搜闻》中有关中国医学的文献。《印中搜闻》刊发一系列
Two ternary materials systems,which comprise photoinitiator/two-photon initiators,oligomer and binder were prepared. Polymeric waveguide film was manufactured b
Pure copper (99.95%) square bars (32 mm×32 mm) were subjected to equal channel angular pressings (ECAP) for 4 passes at room temperature, using 90- die by rout
Microstructure and mechanical properties of AZ31-0.5%Si(mass fraction) alloy processed by ECAP were investigated. Results show that Mg2Si phase formed during so
As an aid in establishing an understanding on the electronic level,the influence of bismuth on the cohesion of nickeló5 (012) grain boundary was determined usi
Electrochemical behavior of LiB compound in LiPF6-DMC/EMC/EC was studied. And morphology of the compound was investigated by SEM. The results show that there ar
Several tensile samples were prepared using laser rapid forming (LRF) with Ti-6Al-4V alloy as powder material, and the samples were annealed. The microstructure
Cermet composites containing mixture of noble metal phase and electrolyte phase are the state-of-the-art electrode materials used for electrochemical sensor and