批林批孔运动深入开展以来,我厂广大职工提高了阶级斗争和路线斗争的觉悟,社会主义积极性空前高涨。1974年上半年,自制成功灯壳切滚边专用机床和六工位冲床各一台,其中配合了二组灯壳冲压机械手,完成了灯壳冲压自动线的大部分工作,并于八月份正式投入生产。这条自动线适用于各种汽车、拖拉机外装式大灯和防雾灯灯壳的冲压加工。过去,每只灯壳的九道冲压工序,分散在各台设备上完成,如果组成一条生产流水线,需要9台设备,23个工人操作。实际生产中是按照工序的先后,轮流在3～4台设备上加工,这样就形成了半制品的成批堆放和多次转运,占用了大量生产面积,延长了生产周期。自动线的基本设计思想就是用机械手解决工序之间的传递问题,变分散加工为自动流水生产,每只机械手可以代替两个工人手操作,整条自动线只 Since the proletarian and pika movement was carried out in depth, the vast numbers of workers and staff of our factory have raised the awareness of class struggle and the line struggle, and the enthusiasm for socialism has risen at unprecedented levels. In the first half of 1974, the Company successfully made most of the work of stamping automatic line of lamp shell with the two sets of stamping robots, which were made by the company, and were put into production in August . This automatic line is suitable for stamping of various automotive, tractor-mounted headlights and anti-fog lamp covers. In the past, the nine stamping processes for each lamp housing were spread over individual machines and nine units and 23 workers were required to operate a single production line. The actual production is in accordance with the sequence of processes, take turns in the 3 to 4 sets of equipment processing, thus forming a semi-finished products in bulk and multiple transshipment, take up a lot of production area, extending the production cycle. Automatic line of the basic design idea is to use robots to solve the problem of transmission between processes, variable processing for the automatic production of water, each robot can replace the two hands of workers, the entire automatic line only