Effect of acidic surface functional groups on Cr(VI) removal by activated carbon from aqueous soluti

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:abckidscba
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The activated carbon with high surface area was prepared by KOH activation. It was further modified by H2SO4 and HNO3 to introduce more surface functional groups. The pore structure of the activated carbons before and after modification was analyzed based on the nitrogen ad-sorption isotherms. The morphology of those activated carbons was characterized using scanning electronic microscopy (SEM). The surface functional groups were determined by Fourier transform infrared spectroscopy (FTIR). The quantity of those groups was measured by the Boehm titration method. Cr(Ⅵ) removal by the activated carbons from aqueous solution was investigated at different pH values. The results show that compared with H2SO4, HNO3 destructs the original pore of the activated carbon more seriously and induces more acidic surface functional groups on the activated carbon. The pH value of the solution plays a key role in the Cr(Ⅵ) removal. The ability of reducing Cr(Ⅵ) to Cr(Ⅲ) by the activated carbons is relative to the acidic surface functional groups. At higher pH values, the Cr(Ⅵ) removal ratio is im-proved by increasing the acidic surface functional groups of the activated carbons. At lower pH values, however, the acidic surface functional groups almost have no effect on the Cr(Ⅵ) removal by the activated carbon from aqueous solution.
其他文献
仿真模型具有极高的重用和共享价值.针对因缺乏专业管理造成的已有仿真模型得不到充分利用甚至流失和损坏的现状,对仿真模型管理方法进行研究,设计开发了基于Web的仿真模型管
基于桥梁的极值应力监测信息,采用贝叶斯动态线性模型(BDLM),建立了监测应力的贝叶斯动态线性组合预测模型;采用该模型对结构的可靠指标进行实时预测,并通过工程实例进行了极
进行了9块粘贴竹板加固预制空心板的对比试验,其中3块为对比试件,6块为粘贴不同宽度和厚度竹板的加固试件.研究结果表明,粘贴不同竹板加固后,预制空心板开裂荷载较未加固对比
在当前受端负荷中心缺乏电源支持、负荷高度集中的情况下,大容量静止同步补偿器(STATCOM)对于增加受端负荷母线动态无功支撑、提高电压稳定性具有重要意义。文中提出了一种大
提出了一种仅利用单端电压暂态量频谱信息进行直流输电线路精确故障定位的新方法.与传统的基于偏微分方程的行波分析方法不同,文中采用的基于行波固有频率主成分的测距方法不
目前广泛应用于VSC-HVDC的变流方案主要有3种:HVDC-light、HVDC-Plus和变桥臂多电平拓扑(alternative arm multi-level converter,A2MC).A2MC结构采用变桥臂技术,在直流母线
为了准确简便地预测路堤在荷载下发生的沉降变形,必须对桩基复合地基的桩土应力比进行合理正确的评价计算.针对高速公路地基处理中采用刚性桩复合地基的情况,假设路堤土中基
The thrust hydraulic system of the prototype shield machine with pressure and flow compound control scheme was introduced. The experimental system integrated wi
A methodology was presented relating the microstructure of asphalt mixtures to their damage behavior. Digital image techniques were used to capture the asphalt
Using a differential form of the potential energy function and taking the effect of work applied by external force in far field into account, the mechanism of s