Preparation and dielectric properties of porous silicon nitride ceramics

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:IamluyundongPPA
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Porous silicon nitride ceramics with difference volume fractions of porosity from 34.1% to 59.2% were produced by adding different amount of the pore-forming agent into initial silicon nitride powder. The microwave dielectric property of these ceramics at a frequency of 9.36 GHz was studied. The crystalline phases of the samples were determined by X-ray diffraction analysis. The influence of porosity on the dielectric properties was evaluated. The results show that α-Si3N4 crystalline phase exists in all the samples while the main crystalline phase of the samples is β-Si3N4,indicating that the a/b transformation happens during the preparation of samples and the transformation is incomplete. There is a dense matrix containing large pores and cavities with needle-shaped and flaky β-Si3N4 grains distributing. The dielectric constant of the ceramics reduces with the increase of porosity.
其他文献
A nonlinear optical (NLO) active alkoxysilane chromophore (SGDR1) was synthesized. A fluorinated polyimide/SGDR1 composite was prepared to improve the poor temp
The mechanism of the improvement of the cycling stability of the La-Mg-Ni-Co based hydrogen storage alloy electrode was systematically investigated. The results
A high-current pulsed electron beam(HCPEB) generated on the system of Nadezhda-2 was applied to improve the microstructure and performance of 0.20% C low carbon
The possibility of ultra-thin Y2O3 (yttrium sesquioxide) films as insulator of metal ferroelectric insulator semiconductor (MFIS) structure was investigated. Th
In order to research the microstructure of TiAl alloy and TiAl-mould reaction between TiAl and ceramic mould shells prepared with the low cost binder in investm
As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have
This paper introduces a video application-aware cross-layer framework for joint performance-energy optimization,considering the scenario of multiple users upstr
Bismuth oxide has wide applications in superconductive material, photoelectric material, electronic ceramic, electrolyte, and catalysts. To produce ultrafine bi
Al-1.0%Si alloy rods containing unidirectional microstructures were fabricated by continuous unidirectional solidification (CUS) process. The crystal growth ori
To improve the cycle performance of spinel LiMn2O4 as the cathode material of 4 V class Li secondary batteries,LiNixMn2-xO4 (x=0~0.3) samples were prepared using