论文部分内容阅读
多特库公司开发了一种超低温冷却液供给装置,它可在切削加工中向工件和刀具供给超低温冷风、喷雾和油滴.该装置由分离器和喷雾装置组成,当装置的电机与电磁阀的电源接通后,再将空气源与分离器接通,这样即可进行简单的自动控制.供给冷风时则不供给油剂.它可产生-5°～-35℃ 的冷风,冷却效果极好.需要喷雾时,可使用少量的润滑油,并使之呈分离状,以减少刀具损伤.将此项技术应用于金属切削加工,可有效抑制摩擦热的产生,因此,可提高加工速度,改善产品质量.市场上出售的切削液粘度较高,使用效果较差.多特库公司巳开发出铁、不锈钢、非铁金属等专用的切削液.
Dütküler has developed an ultra-low-temperature coolant supply that supplies ultra-low temperature cold air, spray and oil droplets to workpieces and tools during machining. The unit consists of a separator and a spray unit. When the unit’s motor and solenoid valve Of the power is turned on, and then the air source and the separator connected, so that simple automatic control. Supply of cold air is not supplied oil. It can produce cold -5 ° ~ -35 ℃, the cooling effect of the pole Good. Spray, you can use a small amount of oil, and make it was separated to reduce tool damage.This technology used in metal cutting, which can effectively inhibit the generation of friction heat, therefore, can improve the processing speed, Improve the quality of the products. The viscosity of the cutting fluid sold on the market is higher, the use of less effective. 多特库 公司 has developed iron, stainless steel, non-ferrous metals and other special cutting fluid.