论文部分内容阅读
橡胶模制品常需要进行后加工,如,除掉毛边.图1是有毛边的36个工作件连成一块薄片的模压胶块.橡胶模制品在脱模之后,作为经济的方法可直接撕去毛边,因为后加工可在机器有效时
Rubber molded products often require post-processing such as removal of burrs Figure 1 is a molded rubber block having 36 sheets of burrs joined together as a sheet, after which the rubber moldings can be torn off as an economical method Burrs because the finishing can be done when the machine is active