当摩托车存在耗油量高的情况下,一般是首先想到调节化油器。调化油器时是将浮子室内油针上调,上调的幅度越大耗油越少,而当调至顶格耗油仍然高时(油平面正常),可能就束手无策。 本人经过一系列试验后,可做到成功地控制耗油量。方法是:将主量孔螺丝拧下,找一截约3cm长燃烧 When a motorcycle has high fuel consumption, it is generally the first thing to think about adjusting the carburetor. When adjusting the carburetor, the float needle in the float chamber is adjusted upwards, and the larger the increase is, the lower the fuel consumption. When the fuel consumption is still high at the top of the grid (the oil level is normal), it may be overwhelmed. After a series of tests, I can successfully control the fuel consumption. The method is: the main hole screw unscrew, find a section about 3cm long burning