圆柱凸轮加工中的圆弧插补处理湖北工学院刘鹄然圆柱凸轮的设计通常按平面凸轮展开图近似设计。其展开图一般为直线和圆弧。但实际加工时仍按刀具轴向移动凸轮绕自身轴线转动即ｘｇ联动，从而产生了对于展开囹中圆弧部分如何运用圆弧损补的问题。设凸轮展成平面后，Ｘ方向... Cylindrical cam machining in the arc interpolation processing Hubei University Liu Ran natural design of the cam is usually based on the planar cam expansion plan approximate design. Its expansion plans are generally straight lines and arcs. However, the actual processing is still according to the tool axial movement of the cam around its own axis that is linked to xg, resulting in the expansion of the arc part of the arc how to use arc damage. After setting the cam into a plane, the X direction ...