论文部分内容阅读
新的Eimco 40S型装载机连接着一个钢刮板运输机,它是由Eimco 40型装载机改进的。这种新型装载机减少了维护工作量,并能在陡的角度下装载物料。有了钢刮板就取消了中间支承滚子、滑轮和皮带清理器,并消除了相应的维护问题。链条的正向驱动防止了物料的下滑,其至在运送湿物料时也一样;同时它可以顺利地在15°的坡度上工作。被刮板刮带的物料不向回滑落,从而使工作循环加快了。钢刮板运输机比皮带运输机薄一些。因此就可以在运输机的前端安放一较深的貯料漏斗,使其貯料能力成倍地提高,并使其能在更换车辆时继续装载。新型运输机要求的矿车顶和巷道顶板之间的间隙也较小,这就能使大矿车在低巷道中装的更满一些。运输
The new Eimco 40S loader is connected to a steel scraper conveyor, which is modified by the Eimco 40 Loader. This new loader reduces maintenance effort and loads material at steep angles. With the steel scraper, the intermediate backup rollers, pulleys and belt cleaners were eliminated and the corresponding maintenance problems eliminated. The positive drive of the chain prevents the material from slipping down to the same extent as it delivers the wet material, and at the same time it can work smoothly at a gradient of 15 °. The material scraped by the scraper does not slide backwards, so that the working cycle is accelerated. Steel scraper conveyor thinner than the belt conveyor. Therefore, a deeper hopper can be placed at the front end of the transporter, doubling the stocking capacity and allowing it to continue loading when changing vehicles. The clearance required between the roof of the mine and the top of the roadway required by the new transporter is also small, which will make the larger mining truck more fully loaded in the low laneway. transport