论文部分内容阅读
窗框中挺穿榫后,原来在电热铆榫机上由操作工人边转身边敲平边开动机器,逐个铆固,是劳动强度很大的单机操作。现改革成以纵横二台双头铆榫机和四道自动输送装置的一条联动线,从窗框送上,输送气缸依次推动,进入横向铆榫机,铆榫机得讯号后先由压平气缸向下压平,然后由热铆机构通电加热加压铆固,铆毕依次释放复原,输送气缸又开始动作,一面
After wearing the window frame, the machine was originally turned on the electric riveting machine by the operator’s side and beat the flat edge to start the machine, and they were riveted one by one. It was a single machine operation with great labor intensity. It is now being transformed into a linkage line with two horizontal and two double-headed riveting machines and four automatic conveying devices. It is delivered from the window frame, and the conveying cylinders are sequentially pushed into the horizontal riveting machine. After the signal of the riveting machine, it is flattened first. The cylinder is pressed down flat, and then the hot riveting mechanism is energized to heat and press the rivets. After riveting, the cylinders are released and restored, and the conveying cylinder starts to move again.