论文部分内容阅读
GE公司已确定了推力为98千牛的F414发动机的发展途径,这种发动机将装F/A—18E/F,其安装推力将增加25%.这项计划是美国海军在8月初刚收到头两台生产型F414后GE公司提出的.据GE称,交付给海军的两台发动机是早期第一批小批量生产的28台F414-GE-400中的两台,接着到今年底,将交付13台以上.海军与GE公司已签订购买142台早期小批量生产的F414,这些发动机将分三批交付,最后一批将在2001年5月末交付.F414的大批生产在9月开始,每月生产两台,然后增加到6台,大约到2002年,每月的产量将增加到10台.
GE has identified a development path for the F414 engine with a thrust of 98 kN, which will be fitted with a F / A-18E / F that will have a 25% increase in thrust. The plan was just received by the U.S. Navy at the beginning of August Two production F414s were proposed by GE Corp. According to GE, the two engines delivered to the Navy were two of 28 F414-GE-400s, the first of a handful of earlier low-volume versions, to be delivered by the end of this year More than 13. Navy and GE have signed a purchase of 142 F414 early small series production, these engines will be delivered in three batches, the last batch will be delivered by the end of May 2001. F414 large-scale production started in September, every month Production of two, then increased to six units, about 2002, monthly production will increase to 10 units.