论文部分内容阅读
合页的传统施工方法是先用钉锤将螺丝砸入框中1/3,再用螺丝刀拧紧。这种方法容易造成钉帽歪斜。在工程监理过程中,我们建议施工单位用电钻在设计位置钻孔,深度为钉长的1/3,然后安装螺丝,用螺丝刀拧紧。采用此法安装的合页位置正确,且钉帽居中,无锤击印,观感质量明显提高。
The traditional method of construction of the hinge is to use a hammer to smash the screw into the frame and tighten it with a screwdriver. This method easily lead to nail hatched skewed. In the process of project supervision, we suggest that the construction unit drill holes in the design position with the electric drill to a depth of 1/3 of the nail length, and then install the screws and tighten them with a screwdriver. Using this method to install the hinge position is correct, and the nail hat centered, no hammer blow, the perception of quality improved significantly.