论文部分内容阅读
A multichannel methanoic acid(HCOOH,λ= 432.5μm) laser interferometer/polarimeter is being developed from the previous eight-channel hydrogen cyanide(HCN,λ=337 μm) laser interferometer in the HL-2A tokamak.A conventional Michelson-type interometer is used for the electron density measurement,and a Dodel-Kunz-type polarimeter is used for the Faraday rotation effect measurement,respectively.Each HCOOH laser can produce a linearly polarized radiation at a power lever of ~30 mW,and a power stability <10%in 50 min.A beam waist(diameter d_0≈12.0 mm,about 200 mm away from the outlet) is finally determined through a chopping modulation technique.The latest optical layout of the interferometer/polarimeter has been finished,and the hardware data processing system based on the fast Fourier transform phasecomparator technique is being explored.In order to demonstrate the feasibility of the diagnostic scheme,two associated bench simulation experiments were carried out in the laboratory,in which the plasma was simulated by a piece of polytetrafluoroethene plate,and the Faraday rotation effect was simulated by a rotating half-wave plate.Simulation results agreed well with the initial experimental conditions.At present,the HCOOH laser interferometer/polarimeter system is being assembled on HL-2A,and is planned to be applied in the 2014-2015 experimental campaign.
A multichannel methanoic acid (HCOOH, λ = 432.5 μm) laser interferometer / polarimeter is being developed from the previous eight-channel hydrogen cyanide (HCN, λ = 337 μm) laser interferometer in the HL-2A tokamak.A conventional Michelson-type interometer is used for the electron density measurement, and a Dodel-Kunz-type polarimeter is used for the Faraday rotation effect measurement, respectively. Each HCOOH laser can produce a linearly polarized radiation at a power lever of ~ 30 mW, and a power stability < 10% in 50 min. A beam waist (diameter d_0≈12.0 mm, about 200 mm away from the outlet) is finally determined through a chopping modulation technique. The latest optical layout of the interferometer / polarimeter has been finished, and the hardware data processing system based on the fast Fourier transform phasecomparator technique is being explored. In order to demonstrate the feasibility of the diagnostic scheme, two associated bench simulation experiments were carried out in the laboratory, in whic h the plasma was simulated by a piece of polytetrafluoroethene plate, and the Faraday rotation effect was simulated by a rotating half-wave plate. Simulation results agreed well with the initial experimental conditions. At present, the HCOOH laser interferometer / polarimeter system is being assembled on HL-2A, and is planned to be applied in the 2014-2015 experimental campaign.