平面钢板的双面焊接工艺浅析在变压器的焊接中，大多数情况下是平面钢板与其它零件的焊接。通常的焊接方法是在钢板一侧将零件与钢板焊接在一起，若是强度不够，还可以在钢板与零件之间加上加强铁等。这种焊接方法对于焊接强度要求不高的－情况下是有其优越性的，但在焊接... Flat steel double-sided welding process analysis In the transformer welding, in most cases is the flat plate and other parts of the welding. The usual method of welding is to weld the parts together with the steel plate on one side of the steel plate. If the strength is not sufficient, it is also possible to add reinforced iron between the steel plate and the parts. This welding method for the welding strength of the less demanding - the case has its advantages, but in the welding ...