目前,检测摄影物镜工怍部分,基本上采用目测法或摄影法检测的仪器。上述检测方法是主观的,采用这些检测方法(特别是摄影法)过程很繁锁,随着操作者的迅速疲劳会导致大量的偶然误差。参考文献[1]中指出,摄影物镜在最后装配和调校时,必须有实现新的光电检测法的三种自动检测仪器。 At present, the detection of photographic lens Gong 怍 part, basically using visual or photographic detection equipment. The above detection methods are subjective, and the procedure using these detection methods (especially photography) is very cumbersome, resulting in a large number of accidental errors with the operator’s rapid fatigue. Reference [1] pointed out that the photographic objective in the final assembly and adjustment, there must be to achieve the new photoelectric detection method of three automatic detection equipment.