论文部分内容阅读
4.5试验防护警告本规范适用于毒品或危险品的抽样和试验,所以,应该强调指出在处理和操作时,必须遵循所有适用的安全条例、规则和操作方法。4.5.1 4.6.1到4.6.8条试验的抽样应采用ASTM E 300固体抽样法,从需要取样的每小批中选出约500g的混合炸药。应按照MIL-STD-1235,CPS-1方案,检验Ⅱ级,6.5％AQL(可接受质量水平)选取用作检验的样品。如果任一样品不符合任何1项试验要求,该样品代表的小批应予拒收。在已经被试验验收的最近小批和不符合要求的小批之间的生产期间内生产的所有
4.5 Test Protection WARNING This Code applies to the sampling and testing of drugs or dangerous goods and should therefore be emphasized that all applicable safety regulations, rules and operating practices must be observed when handling and handling. 4.5.1 Sampling according to 4.6.1 to 4.6.8 shall be based on the ASTM E 300 solid sampling method, using approximately 500 g of mixed explosives from each small batch required for sampling. The samples used for testing shall be selected in accordance with MIL-STD-1235, CPS-1 protocol, test grade II, 6.5% AQL (Acceptable Quality Level). If any sample does not meet any of the 1 test requirements, the sample represents small lots that should be rejected. All manufactured within the production period between the last small batch that has been tested for acceptance and the small batch that does not meet the requirements