【摘 要】
：
A diode-pumped alkali vapor laser (DPAL) is one of the most promising candidates of the next-generation high-powered laser source. As the saturated number density of alkali vapor is highly dependent on the temperature inside a vapor cell, the temperature
【机 构】
：
SouthwestInstituteofTechnicalPhysics,Chengdu,Sichuan610041,China
【出 处】
：
HighPowerLaserScienceandEngineering
论文部分内容阅读
A diode-pumped alkali vapor laser (DPAL) is one of the most promising candidates of the next-generation high-powered laser source. As the saturated number density of alkali vapor is highly dependent on the temperature inside a vapor cell, the temperature distribution in the cross-section of a cell will greatly affect the homogeneity of a laser medium and the output characteristics of a DPAL. In this paper, we developed an algorithm based on the regime concluding quasi-Hilbert transform to evaluate the phase aberration of a wavefront when the probe beam passes through the vapor cell placed in one arm of a Mach–Zehnder interference setup. According to the theoretical algorithm, we deduced the temperature distribution of a cesium vapor cell for different heating conditions. The study is thought to be useful for development of a high-powered laser.
其他文献
报道了HgCdTe阳极硫化 ZnS钝化膜表面与界面X射线光电子能谱(XPS)的研究及结果。系统地介绍了HgCdTe阳极硫化 ZnS钝化膜的制备,Br2-CH3OH与HgCdTe化学抛光的反应过程,阳极硫化的化学组成及生长机制。阐述了该钝化结构不同深度的组分分布及其对HgCdTe光伏器件电学特性的影响。
复合材料的主要缺陷有分层和脱粘等。脉冲红外热成像技术作为一种新型的无损检测技术, 目前在航空航天领域得到了越来越广泛的应用。研究了脉冲红外热成像技术对碳纤维复合材料的检测能力, 通过理论建立评价脉冲红外热成像检测分辨能力的依据, 并且在实验上利用碳纤维复合材料设计了不同深度、不同大小和不同相邻间距的脱粘模拟缺陷, 进行了脉冲红外热成像技术对碳纤维复合材料检测能力的实验研究。实验结果证明脉冲红外热成像技术对于蒙皮厚为1 mm和0.5 mm的预制缺陷均可检测, 通过检测结果分析了缺陷的大小、缺陷的深度和相邻缺
Periodically poled lithium niobate on insulator (LNOI) ridge waveguides are desirable for high-efficiency nonlinear frequency conversions, and the fabrication process of such waveguides is crucial for device performance. In this work, we report fabricatio
采用菲涅耳波带板作为色散元件,小孔压缩线宽的方法,在合肥国家同步辐射实验室在水窗波段完成了一个多缝干涉实验,观察到清晰的干涉条纹。
本文报道了以准分子激光泵浦的染料激光激发钠分子,产生由钠分子A~1 sum from u to 态到X~1 sum from g to 态的众多激光输出谱线.当加以谐振腔后,这些谱线的强度可增加一个数量级.
用激光测距仪测定远处目标(如卫星),距离可达3,000公里,精度可达1.5米。这种性能由三个主要因素决定:(i)激光的方向性,它使发射的功率集中在一很窄的圆锥中;(ii)最新的光电倍增器的高探测能力,甚至在只接收到大约一百个光子之后也能响
本文详细研究了银溶胶中加入自来水而引起银溶胶聚集的现象,这种聚集不是简单地堆积成团状,而是形成链状结构,即形成分形体态。
由于采用电子卷帘式快门,大面阵互补金属氧化物半导体(CMOS)航空相机在高速成像时不仅会产生像移,还会引入由卷帘快门(RS)效应带来的几何畸变。传统的将两种图像退化因素分开进行处理的方法,过程繁复,计算复杂度高。针对航空前向飞行带来的线性像移和RS畸变,通过分析各自的数学模型,推导出了二者之间的紧密联系,提出了基于线性像移参数估计的双重退化图像恢复方法。随后设计了航空前向飞行模拟实验,通过直线位移
Squeezed states belong to the most prominent non-classical resources. They have compelling applications in precise measurement, quantum computation, and detection. Here, we report on the direct measurement of 13.8 dB squeezed vacuum states by improving th
利用简并V型三能级原子与振幅很大的单模相干态腔场的Raman相互作用,实现两比特的控制非门,同时提出了一种传送未知原子态的方案。