Effects of BN content on the mechanical properties of nanocrystalline 3Y-TZP/Al2O3/BN dental ceramic

来源 :International Journal of Minerals, Metallurgy and Materials | 被引量 : 0次 | 上传用户:yangguaiguai
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
3Y-TZP/3wt% Al2O3 powder was coated with varying amounts of BN using the urea and borate reaction sintering method, and then multiphase ceramics were prepared by hot pressing sintering. The micro-topography and the compositional analysis of synthesized ceramics were conducted through scanning electron microscopy, transmission electron microscopy and X-ray diffraction. A mechanical tester was used to analyze the Vickers hardness, fracture toughness, and bending strength of the synthesized ceramics. The results showed that the ceramic with a BN content of 12wt% showed the best processability, but had diminished mechanical properties (such as fracture toughness and bending strength). The ceramic with a BN content of 9wt% showed better processability than those with 3wt% and 6wt% BN. However, the fracture toughness was affected by the addition of 9wt% BN, making this ceramic only usable as a base material for a three-unit fixed bridge. In contrast, the ceramics with a BN content of 3wt% or 6wt% fulfilled the criteria for use in multi-unit restoration, but their low processability made them unsuitable for milling after sintering.
其他文献
水利项目造福于国家和人民,为了改善民生和人们的生活质量,水利项目的建设目前正在迅速发展.但是,水利项目与其他工程的不同之处在于,工程范围广泛、重点多、难度大.不良的施工质量不可避免地导致各种事故的频繁发生,会产生工程事故隐患,让人民生命财产受到损失.多年的水利项目事故案例让人们痛心疾首,我们需要加强对建设项目质量的监控,以确保水利项目的高质量和高品质.
艺术设计离不开立体构成,立体构成也是艺术设计审美中最重要的组成部分.立体构成主要着重于构造空间立体模型,换言之,立体构成就是将某种造型展示在三维空间中,形成一种立体感和在固定空间中的形态,而环境设计则是指利用立体构成技术的方式,将某建筑的内外环境空间二次建造的过程,并通过该技术将实际物质进行空间构造.
环保约谈是中央生态环保督察工作中重要环节之一,能够有效缓解经济发展与环境保护之间的关系.环保约谈作为一种软约束力,能够有效监督地方政府提高环保意识,规范企业排污规范化,但依旧存在着相关法律制度不完善、监管部门不到位、公众环保意识薄弱等问题.在我国大力推动生态环保督察的背景下,对环保约谈这种监督方式进行探讨并提出完善建议.
“城中村”是我国社会发展中一种不可回避的社会现象,是城乡二元化在城镇化进程中的产物.由于“城中村”建设先天缺少消防规划,建筑密度过大,居住人员缺乏消防安全意识,已成为火灾事故频发的重灾区.
Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800–1200°C and constant strain rates of 0.001, 0.01, 0.1, and 1 s−1. Hot flow curves were used to determine the strain hardening exponent a
Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1−x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co
随着现代社会的发展,电视新闻工作者的工作内容不仅是为广播站服务,还需要在一些媒体上面进行一些新闻的发布以及一些其他的工作,但是按照以前的工作模式很难完成这样的工作,因此媒体融合的重要性就显现出来了.
The microstructural properties and electrochemical performance of zinc (Zn) sacrificial anodes during strain-induced melt activation (SIMA) were investigated in this study. The samples were subjected to a compressive ratio of 20%–50% at various temperatur
MnO2/biomass carbon nanocomposite was synthesized by a facile hydrothermal reaction. Silkworm excrement acted as a carbon precursor, which was activated by ZnCl2 and FeCl3 combining chemical agents under Ar atmosphere. Thin and flower-like MnO2 nanowires
Reaction-bonded B4C–SiC composites are highly promising materials for numerous advanced technological applications. However, their microstructure evolution mechanism remains unclear. Herein, B4C–SiC composites were fabricated through the Si-melt infiltrat